Characterization of Free Cutting Phase in Free Cutting Stainless Steel Containing High Copper
GENG Hong��ming1 ,WU Xiao��chun1 ,WANG Hong��bin1 ,MIN Yong��an1 ,ZHANG Hong��kui2
1. College of Materials Science and Engineering, Shanghai University, Shanghai 200072, China; 2. Baoshan Iron and Steel Co Ltd, Shanghai 200940, China
Characterization of Free Cutting Phase in Free Cutting Stainless Steel Containing High Copper
GENG Hong��ming1 ,WU Xiao��chun1 ,WANG Hong��bin1 ,MIN Yong��an1 ,ZHANG Hong��kui2
1. College of Materials Science and Engineering, Shanghai University, Shanghai 200072, China; 2. Baoshan Iron and Steel Co Ltd, Shanghai 200940, China
ժҪ The machinability of 4Cr13 steel was improved obviously by adding Cu and S. The effect of copper addition on the machinability of 4Cr13 was similar to that of sulphur addition. By means of SEM, EBSD, and HREM, the distribution and size of the free cutting phase in the steel 4Cr13Cu were studied. The results showed that the free cutting phase was copper��rich phase. The copper��rich phases dispersed in the steel and were determined to have about 10 nm in diameter. The content of copper in the copper��rich phase was over 70%.
�ؼ��� ��
machinability ,
copper��rich phase ,
EBSD ,
HREM
Abstract ��The machinability of 4Cr13 steel was improved obviously by adding Cu and S. The effect of copper addition on the machinability of 4Cr13 was similar to that of sulphur addition. By means of SEM, EBSD, and HREM, the distribution and size of the free cutting phase in the steel 4Cr13Cu were studied. The results showed that the free cutting phase was copper��rich phase. The copper��rich phases dispersed in the steel and were determined to have about 10 nm in diameter. The content of copper in the copper��rich phase was over 70%.
Key words ��
machinability
copper��rich phase
EBSD
HREM
�ո�����: 1900-01-01
����:
GENG Hong��ming;WU Xiao��chun;WANG Hong��bin;MIN Yong��an;ZHANG Hong��kui. Characterization of Free Cutting Phase in Free Cutting Stainless Steel Containing High Copper[J]. �й������ڿ���, 2009, 16(1): 54-0.
GENG Hong��ming;WU Xiao��chun;WANG Hong��bin;MIN Yong��an;ZHANG Hong��kui. Characterization of Free Cutting Phase in Free Cutting Stainless Steel Containing High Copper. Chinese Journal of Iron and Steel, 2009, 16(1): 54-0.
���ӱ���:
http://gt.chinamet.cn/Jweb_gtyjxb_en/CN/ �� http://gt.chinamet.cn/Jweb_gtyjxb_en/CN/Y2009/V16/I1/54
[1]
����꣬������. 20CrNi2Mo�ָ�Ħ��ĥ����Ϊ���α���������α�
[2]
���ƣ����������. ����ѹ���ʶ������Ƽ�ȡ���ֳ����ٽᾧ�˻��Ӱ��
[3]
Gan- lin XIE,An HE,Hai- long ZHANG,Gen- qi WANG,Xi- tao WANG. A Physically Based Dynamic Recrystallization Model Considering Orientation Effects for a Nitrogen Alloyed Ultralow Carbon Stainless Steel during Hot Forging
[4]
Bo YAN,,Si-hai JIAO,Dian-hua ZHANG. Microstructure and Mechanical Properties of Semi-continuous Equal-channel Angular Extruded Interstitial-free Steel
[5]
J. SALINAS B.,A. SALINAS R.. Evaluation of Microstructure and Magnetic Properties in Non-oriented Electrical Steel Strained by Tension
[6]
�߽��ģ��Ըգ��Ƹ�. ��������HiB�ֵĶ����ٽᾧ��Ϊ
[7]
��ȫ ������������ �� �����ұ� ������� . ����EBSD�Ľ������μ����ϵ��ȷ������
[8]
���ƣ���־������Ÿ�������Ȩ. �ͺϽ�ְ�����֯��Ӱ��������Եġ���Ч�����ߴ硱
[9]
Hong-ying SUN,,Zhang-jian ZHOU,Man WANG,Xiao LI. Effect of Thermomechanical Parameters on ��3n Grain Boundaries and Grain Boundary Networks of a New Superaustenitic Stainless Steel
[10]
HE Tong,LIU Yan-dong,SUN Wei,ZUO Liang. Formation of Nuclei With {111}<110> and {111}<112> Orientations of IF Steel at Early Stage of Recrystallization Using EBSD Analysis
[11]
�¾��������»��������������. DP590˫��ֵ���⼼���ľ�ϸ�о�
[12]
��³��������������ض�������. ���ټ���������BH���ٽᾧ����
[13]
MI Zhen-li,JIANG Hai-tao,LI Zhi-chao,CHEN Mei-fang,WANG Zhi-gang. Effect of Finishing Rolling Temperature on Microstructure and Mechanical Properties of Microalloyed TRIP Steels
[14]
Karin Gong,LUO He-li,ZHOU Zhi-feng,TIAN Zhi-ling,Lars Nyborg,LI Chang-hai. Wear Evaluation on Ni3Al/MnS Composite Related to Metallurgical Processes
[15]
���࣬��Ӧ�䣬��־��. 00Cr12Ti�����岻��ֵ����ṹEBSD�о�
2009, Vol. 16 
