ժҪ In rail rolling by universal mill, a simplified 3-dimention theoretical model has been built firstly. The kinematically admissible velocity field of the web, head and base of rail have been determined respectively, moreover the corresponding strain rate field and the strength of shear strain rate have been also obtained. Then the plastic deformation power of corresponding deformation zone, the powers consumed on the velocity discontinuity surface and the powers generated for backward slip and forward slip have been proposed. According to the upper-bound method, the roll force of horizontal roll and two vertical rolls can be obtained. Moreover, The process of 18kg/m light rail and 60kg/m heavy rail universal rolling have been simulated by rigid-plastic FEM(finite element method) for verifying the theoretical model. And the universal rolling experiments of 18kg/m light rail has been accomplished in Yanshan University Rolling Laboratory. Compared the results of numerical simulation and the experimental data, the roll force from upper-bound method is somewhat greater than experimental data but in general do not exceed them by 20 percent. So, it is reliable and feasible to preset and optimize the parameter of rolling technology according to the upper-bound method.
Abstract��In rail rolling by universal mill, a simplified 3-dimention theoretical model has been built firstly. The kinematically admissible velocity field of the web, head and base of rail have been determined respectively, moreover the corresponding strain rate field and the strength of shear strain rate have been also obtained. Then the plastic deformation power of corresponding deformation zone, the powers consumed on the velocity discontinuity surface and the powers generated for backward slip and forward slip have been proposed. According to the upper-bound method, the roll force of horizontal roll and two vertical rolls can be obtained. Moreover, The process of 18kg/m light rail and 60kg/m heavy rail universal rolling have been simulated by rigid-plastic FEM(finite element method) for verifying the theoretical model. And the universal rolling experiments of 18kg/m light rail has been accomplished in Yanshan University Rolling Laboratory. Compared the results of numerical simulation and the experimental data, the roll force from upper-bound method is somewhat greater than experimental data but in general do not exceed them by 20 percent. So, it is reliable and feasible to preset and optimize the parameter of rolling technology according to the upper-bound method.
DONG Yong-gang. Theoretical and Experimental Research on the Rolling Force in Rail Hot Rolling by Universal Mill[J]. �й������ڿ���, 2010, 17(1): 27-32.
DONG Yong-gang. Theoretical and Experimental Research on the Rolling Force in Rail Hot Rolling by Universal Mill. Chinese Journal of Iron and Steel, 2010, 17(1): 27-32.
2010, Vol. 17 
