Microstructure, Properties and Heat Treatment Process of Powder Metallurgy Superalloy FGH95
GUO Wei��min,WU Jian��tao,ZHANG Feng��ge,ZHAO Ming��han
High Temperature Materials Research Institute, Central Iron and Steel Research Institute, Beijing 100081, China
Microstructure, Properties and Heat Treatment Process of Powder Metallurgy Superalloy FGH95
GUO Wei��min,WU Jian��tao,ZHANG Feng��ge,ZHAO Ming��han
High Temperature Materials Research Institute, Central Iron and Steel Research Institute, Beijing 100081, China
ժҪ Microstructure and properties of nickel��based powder metallurgy (PM) superalloy were presented. Effects of nonmetallic inclusions and heat treatment on microstructure and properties were discussed. Development tendency of microstructure and properties of PM superalloy was presented.
�ؼ��� ��
microstructure ,
property ,
PM superalloy ,
heat treatment
Abstract ��Microstructure and properties of nickel��based powder metallurgy (PM) superalloy were presented. Effects of nonmetallic inclusions and heat treatment on microstructure and properties were discussed. Development tendency of microstructure and properties of PM superalloy was presented.
Key words ��
microstructure
property
PM superalloy
heat treatment
�ո�����: 1900-01-01
����:
GUO Wei��min;WU Jian��tao;ZHANG Feng��ge;ZHAO Ming��han. Microstructure, Properties and Heat Treatment Process of Powder Metallurgy Superalloy FGH95[J]. �й������ڿ���, 2006, 13(5): 0-65.
GUO Wei��min;WU Jian��tao;ZHANG Feng��ge;ZHAO Ming��han. Microstructure, Properties and Heat Treatment Process of Powder Metallurgy Superalloy FGH95. Chinese Journal of Iron and Steel, 2006, 13(5): 0-65.
���ӱ���:
http://gt.chinamet.cn/Jweb_gtyjxb_en/CN/ �� http://gt.chinamet.cn/Jweb_gtyjxb_en/CN/Y2006/V13/I5/0
[1]
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel
[2]
Xiao-li Zhao,,Yong-jian Zhang,Cheng-wei Shao,Wei-jun Hui,Han Dong. Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment
[3]
Min-qiang Gao,Ying-dong Qu,Guang-long Li,Jun-hua You,Rong-de Li. Cementites decomposition of a pearlitic ductile cast iron during graphitization annealing heat treatment
[4]
Hong-ru Ren,Jin-tao Gao,Zhe Wang,Chong Li,Fu-qiang Wang,Zhan-cheng Guo. Evolution of microstructure, mechanical and magnetic properties of electrodeposited 50%Ni-Fe alloy foil after thermal treatment
[5]
Hang-wei Zhou,,Hui-qun Liu,,Dan-qing Yi,,Yu Xiao,,Xiao-long Zhao,Jian Wang,Qi Gao. Effect of �� phase on fatigue crack growth of Ti-6242 alloy
[6]
Reng-chong Xu,,Yan-lin He,,Hu Jiang,,Hua Wang,,Na-qiong Zhu,,Xiao-gang Lu,, Lin Li,. Microstructures and mechanical properties of ferrite-based lightweight steel with different compositions
[7]
Zhu-jun Jiang,Yu-ye Wu,,Jing-min Wang,Cheng-bao Jiang. Influence of cooling rate on magneto-structural transition and magnetocaloric effect of Ni30Cu8Co12Mn37Ga13 alloy
[8]
Wei-jun Hui,*,Na Xiao,Xiao-li Zhao,Yong-jian Zhang,Yu-feng Wu. Effect of vanadium on dynamic continuous cooling transformation behavior of medium-carbon forging steels
[9]
Yong-xing Jiao,Jian-sheng Liu*,Xing-wang Duan,Xiao-hua Zheng,Wen-wu He. Prediction of critical forging penetration efficiency for 06Cr19Ni9NbN steel by dynamic recrystallization
[10]
Ming-bo Zhou,Jing-lin Tang,*,Jie Yang,Cun-yu Wang. Tailored properties of a novelly-designed press-hardened 22MnMoB steel
[11]
Zhong-liang Tian,,Sen-bao Jiang,Zheng-zong Chen,Han-sheng Bao,Zheng-dong Liu,*. Microstructural evolution and mechanical properties of a new Ni-based heat-resistant alloy during aging at 750��C
[12]
Cheng-song Liu,Xiao-qin Liu,*,Hong-wei Ni,Shu-feng Yang,Jing-she Li,Fei Ye. Effect of vanadium on modification of inclusions in Mn- and Si-deoxidized steel during heat treatment at 1473 K
[13]
Da-shan Sui,*,Hai-ming Zhang,Hong-yang Zhu,Zhe Zhu,Zhen-shan Cui. Effects of process parameters on fragment and refinement of millimeter-grade coarse grains for 316LN steel during hot cogging
[14]
Hong-bo Pan,,*,Meng-jiao Zhang,Wei-ming Liu,,Jun Yan,,Hui-ting Wang,Chang-sheng Xie,Zhan Guo. Effects of micro-alloying and production process on precipitation behaviors and mechanical properties of HRB600
[15]
Wan-li Zhao,Ding-hao Miao,Yong Zhang*,Zhan-bing He. Big-data analysis of phase-formation rules in high-entropy alloys
2006, Vol. 13 