Strain Hardening and Strain Rate Sensitivity Behaviors of Advanced High Strength Steels
F Ozturk1,A Polat1,S Toros1,R C Picu2
1. Department of Mechanical Engineering, Nigde University, Nigde 51245, Turkey 2. Department of Mechanical,Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy 12180, New York, USA
Strain Hardening and Strain Rate Sensitivity Behaviors of Advanced High Strength Steels
F Ozturk1,A Polat1,S Toros1,R C Picu2
1. Department of Mechanical Engineering, Nigde University, Nigde 51245, Turkey 2. Department of Mechanical,Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy 12180, New York, USA
ժҪ The mechanical properties of commercial dual phase (DP), transformation induced plasticity (TRIP), and high strength low alloy (HSLA-340) steel sheets are investigated and compared at various strain rates ranging from 0. 0017 to 0. 17 s-1 at ambient temperature. TRIP steel outperforms the other two materials, having comparable ductility and twice as large strength relative to DP steel. TRIP has larger strength and much larger ductility than HSLA-340. The exceuent ductility of TRIP800 is due to its high strain hardening capability, which promotes stable plastic deformation. It is observed that the strain hardening rate in TRIP800 does not decrease to zero at failure, as common in most materials in which failure is preceded by necking.
Abstract��The mechanical properties of commercial dual phase (DP), transformation induced plasticity (TRIP), and high strength low alloy (HSLA-340) steel sheets are investigated and compared at various strain rates ranging from 0. 0017 to 0. 17 s-1 at ambient temperature. TRIP steel outperforms the other two materials, having comparable ductility and twice as large strength relative to DP steel. TRIP has larger strength and much larger ductility than HSLA-340. The exceuent ductility of TRIP800 is due to its high strain hardening capability, which promotes stable plastic deformation. It is observed that the strain hardening rate in TRIP800 does not decrease to zero at failure, as common in most materials in which failure is preceded by necking.
F Ozturk,A Polat,S Toros,R C Picu. Strain Hardening and Strain Rate Sensitivity Behaviors of Advanced High Strength Steels[J]. �й������ڿ���, 2013, 20(6): 68-74.
F Ozturk,A Polat,S Toros,R C Picu. Strain Hardening and Strain Rate Sensitivity Behaviors of Advanced High Strength Steels. Chinese Journal of Iron and Steel, 2013, 20(6): 68-74.
2013, Vol. 20 
