ժҪ Fe73.5Cu1Nb3Si15.5B7 nanocrystalline powder cores with different particle sizes ranging from 10 to 125 ��m were fabricated by cold-pressing techniques. The cores exhibited increased core loss Pcv and decreased initial permeability ��i with addition of fine powders below 50 ��m in size, and the content should be less than 40 mass%. It was thought to be closely related to the high coercive force Hc due to the stresses generated during the crushing process and high demagnetization fields of small powders. Furthermore, modifying the alloy compositions by adding defined amount of Ni could improve the soft magnetic properties, including superior characteristics of permeability under high direct current (DC) bias field and comparable low core loss at high frequency.
Abstract��Fe73.5Cu1Nb3Si15.5B7 nanocrystalline powder cores with different particle sizes ranging from 10 to 125 ��m were fabricated by cold-pressing techniques. The cores exhibited increased core loss Pcv and decreased initial permeability ��i with addition of fine powders below 50 ��m in size, and the content should be less than 40 mass%. It was thought to be closely related to the high coercive force Hc due to the stresses generated during the crushing process and high demagnetization fields of small powders. Furthermore, modifying the alloy compositions by adding defined amount of Ni could improve the soft magnetic properties, including superior characteristics of permeability under high direct current (DC) bias field and comparable low core loss at high frequency.
Chun-bo HUANG,,Tian-cheng LIU,,Xiang-yue WANG,,Cao-wei LU,,De-ren LI,,Zhi-chao LU,. Magnetic Properties of Nanocrystalline Powder Cores Fabricated by Mechanically Crushed Powders[J]. �й������ڿ���, 2015, 22(1): 67-71.
Chun-bo HUANG,,Tian-cheng LIU,,Xiang-yue WANG,,Cao-wei LU,,De-ren LI,,Zhi-chao LU,. Magnetic Properties of Nanocrystalline Powder Cores Fabricated by Mechanically Crushed Powders. Chinese Journal of Iron and Steel, 2015, 22(1): 67-71.
2015, Vol. 22 
