Wear Behavior of Aluminum Matrix Hybrid Composites Fabricated through Friction Stir Welding Process
Halil Ibrahim KURT1,Murat ODUNCUOGLU1,Ramazan ASMATULU2
1. Department of Mechanical and Metal Technologies, Technical Sciences, Gaziantep University, Gaziantep 27310,Gaziantep, Turkey 2. Department of Mechanical Engineering, Wichita State University, Wichita 67260, KS, USA
Wear Behavior of Aluminum Matrix Hybrid Composites Fabricated through Friction Stir Welding Process
Halil Ibrahim KURT1,Murat ODUNCUOGLU1,Ramazan ASMATULU2
1. Department of Mechanical and Metal Technologies, Technical Sciences, Gaziantep University, Gaziantep 27310,Gaziantep, Turkey 2. Department of Mechanical Engineering, Wichita State University, Wichita 67260, KS, USA
ժҪ Effects of friction stir processing (FSP) parameters and reinforcements on the wear behavior of 6061-T6 based hybrid composites were investigated. A mathematical formulation was derived to calculate the wear volume loss of the composites. The experimental results were contrasted with the results of the proposed model. The influences of sliding distance, tool traverse and rotational speeds, as well as graphite (Gr) and titanium carbide (TiC) volume fractions on the wear volume loss of the composites were also investigated using the prepared formulation. The results demonstrated that the wear volume loss of the composites significantly increased with increasing sliding distance, tool traverse speed, and rotational speed; while the wear volume loss decreased with increasing volume fraction of the reinforcements. A minimum wear volume loss for the hybrid composites with complex reinforcements was specified at the inclusion ratio of 50% TiC+50% Al2O3 because of improved lubricant ability, as well as resistance to brittleness and wear. New possibilities to develop wear-resistant aluminum-based composites for different industrial applications were proposed.
Abstract��Effects of friction stir processing (FSP) parameters and reinforcements on the wear behavior of 6061-T6 based hybrid composites were investigated. A mathematical formulation was derived to calculate the wear volume loss of the composites. The experimental results were contrasted with the results of the proposed model. The influences of sliding distance, tool traverse and rotational speeds, as well as graphite (Gr) and titanium carbide (TiC) volume fractions on the wear volume loss of the composites were also investigated using the prepared formulation. The results demonstrated that the wear volume loss of the composites significantly increased with increasing sliding distance, tool traverse speed, and rotational speed; while the wear volume loss decreased with increasing volume fraction of the reinforcements. A minimum wear volume loss for the hybrid composites with complex reinforcements was specified at the inclusion ratio of 50% TiC+50% Al2O3 because of improved lubricant ability, as well as resistance to brittleness and wear. New possibilities to develop wear-resistant aluminum-based composites for different industrial applications were proposed.
Halil Ibrahim KURT,Murat ODUNCUOGLU,Ramazan ASMATULU. Wear Behavior of Aluminum Matrix Hybrid Composites Fabricated through Friction Stir Welding Process[J]. �й������ڿ���, 2016, 23(10): 1119-1126.
Halil Ibrahim KURT,Murat ODUNCUOGLU,Ramazan ASMATULU. Wear Behavior of Aluminum Matrix Hybrid Composites Fabricated through Friction Stir Welding Process. Chinese Journal of Iron and Steel, 2016, 23(10): 1119-1126.