1 Key Laboratory of Metallurgical Emission Reduction & Resources Recycling, Ministry of Education, Anhui University of Technology, Ma��anshan 243002, Anhui, China 2 School of Metallurgical Engineering, Anhui University of Technology, Ma��anshan 243002, Anhui, China
Application status and comparison of dioxin removal technologies for iron ore sintering process
1 Key Laboratory of Metallurgical Emission Reduction & Resources Recycling, Ministry of Education, Anhui University of Technology, Ma��anshan 243002, Anhui, China 2 School of Metallurgical Engineering, Anhui University of Technology, Ma��anshan 243002, Anhui, China
ժҪ The emission of dioxins from the iron ore sintering process is the largest emission source of dioxins, and the reduction in dioxin emission from the iron ore sintering process to the environment is increasingly important. Three approaches to control the emission of dioxins were reviewed: source control, process control, and terminal control. Among them, two terminal control technologies, activated carbon adsorption and selective reduction technology, were discussed in detail. Following a comparison of the reduction technologies, the terminal control method was indicated as the key technology to achieve good control of dioxins during the sintering process. For the technical characteristics of the sintering process and flue gas, multiple methods should be collectively considered, and the most suitable method may be addition of inhibitors + ultra-clean dust collection (electrostatic precipitation/bag filter) + desulphurization + selective catalytic reduction to sufficiently remove multiple pollutants, which provides a direction for the cooperative disposal of flue gas pollutants in future.
Abstract��The emission of dioxins from the iron ore sintering process is the largest emission source of dioxins, and the reduction in dioxin emission from the iron ore sintering process to the environment is increasingly important. Three approaches to control the emission of dioxins were reviewed: source control, process control, and terminal control. Among them, two terminal control technologies, activated carbon adsorption and selective reduction technology, were discussed in detail. Following a comparison of the reduction technologies, the terminal control method was indicated as the key technology to achieve good control of dioxins during the sintering process. For the technical characteristics of the sintering process and flue gas, multiple methods should be collectively considered, and the most suitable method may be addition of inhibitors + ultra-clean dust collection (electrostatic precipitation/bag filter) + desulphurization + selective catalytic reduction to sufficiently remove multiple pollutants, which provides a direction for the cooperative disposal of flue gas pollutants in future.
Hong-ming Long, ? Qi Shi ? Hong-liang Zhang ? Ru-fei Wei ? Tie-jun Chun ? Jia-xin Li. Application status and comparison of dioxin removal technologies for iron ore sintering process[J].Journal of Iron and Steel Research International, 2018, 25(4): 357-365.
Hong-ming Long, ? Qi Shi ? Hong-liang Zhang ? Ru-fei Wei ? Tie-jun Chun ? Jia-xin Li. Application status and comparison of dioxin removal technologies for iron ore sintering process. , 2018, 25(4): 357-365.
Kulkarni P S, Crespo J G, Afonso C A M.Dioxins sources and current remediation technologies��a review[J].Environment international, 2008, 34(1):139-153
[2]
Berg M, Birnbaum L, Denison M, et al.The 2005 World Health Organization Reevaluation of Human and Mammalian Toxic Equivalency Factors for Dioxins and Dioxin-Like Compounds[J].Toxicological Sciences, 2006, 93(2):223-241
[3]
Zhao X, Zheng M, Zhang B, et al.Evidence for the transfer of polychlorinated biphenyls,polychlorinated dibenzo-p-dioxins,and polychlorinated dibenzofurans from soil into biota[J].Science of the total environment, 2006, 368(2):744-752
[4]
Lohmann R, Breivik K, Dachs J, et al.Global fate of POPs: current and future research directions[J].Environmental pollution, 2007, 150(1):150-165
[5]
Lee S J, Park H, Choi S D, et al.Assessment of variations in atmospheric PCDDFs by Asian dust in Southeastern Korea[J].Atmospheric Environment, 2007, 41(28):5876-5886
[6]
Li J, Zhang L, Wu Y, et al.A national survey of polychlorinated dioxins,furans (PCDDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in human milk in China[J].Chemosphere, 2009, 75(9):1236-1242
[7]
Zhao X, Zheng M, Zhang B, et al.Evidence for the transfer of polychlorinated biphenyls,polychlorinated dibenzo-p-dioxins,and polychlorinated dibenzofurans from soil into biota[J].Science of the total environment, 2006, 368(2):744-752
[8]
Wang H F, Zhang C X, Qie J M, et al.Development trends of environment protection technologies for Chinese steel industry[J].Journal of iron and steel research, international, 2017, 24(3):235-242
[9]
Li Z P, Fan X H, Yang G M, et al.Life cycle assessment of iron ore sintering process[J].Journal of iron and steel research, international, 2015, 22(6):473-477
[10]
Qian L X, Long H M, Wu X J, et al.Detection of dioxin emitted during the iron ore sintering process[J].Environment pollution & Control, 2016, 38(6):34-38
[11]
Takeda N, Takaoka M, Oshita K, et al.PCDD/DF and co-planar PCB emissions from crematories in Japan[J]. Chemosphere, 2014, 98: 91-98.[J].Chemosphere, 2014, 98:91-98
[12]
Stieglitz L, Zwick G, Beck J, et al.Carbonaceous Particles in Fly Ash a Source for the De-Novo-Synthesis of Organochloro- compounds[J].Chemosphere, 1989, 19(1):283-290
[13]
Stieglitz L, Eichberger M, Schleihauf J, et al.The Oxidative Degradation of Carbon and Its Role in the De Novo Synthesis of Organohalogen Compounds in Fly Ash[J].Chemosphere, 1993, 27(1):343-350
[14]
Nganai S K.Iron (III) Oxide and Copper (II) Oxide Mediated Formation of PCDD/Fs from Thermal Degradation of 2-MCP and 1, 2-DCBz[D]. Kenyatta University, 2010.
[15]
Peng Y, Chen J, Lu S, et al.Chlorophenols in municipal solid waste incineration: A review[J][J].Chemical Engineering Journal, 2016, 292:398-414
[16]
Born J G P, Mulder P, Louw R.Fly ash mediated reactions of phenol and monochlorophenols: oxychlorination,deep oxidation,and condensation[J].Environmental science & technology, 1993, 27(9):1849-1863
[17]
Addink R, Olie K.Mechanisms of Formation and Destruction of Polychlorinated Dibenzo-p-Dioxins and Dibenzofurans in Het- erogeneous Systems[J].Environmental Science & Technology, 2010, 29(6):1425-1435
[18]
Guliott B K, Lemieux P M.Role of combustion and sorbent parameters in prevention of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran formation during waste combustion[J].Environmental Science & Technology, 1994, 28(l):107-118
[19]
Yang H F, Li X W, Yu Y M, et al.Study on influence of hot air sintering on dioxin formation[J].Sintering and Pelletizing, 2011, 36(1):47-51
[20]
Zhang Y C, Long H M, Chun T J, et al.Influences of Cu and Cl elements from raw materials on the emission of PCDDFs and its emission reduction technology[J].Iron and Steel, 2015, 50(12):42-46
[21]
Kasama S, Yamamura Y, Watanabe K.Investigation on the dioxin emission from a commercial sintering plant[J].ISIJ international, 2006, 46(7):1014-1019
[22]
Fan X H, Yu Z Y, Gan M, et al.Influence of O2 content in circulating flue gas on iron ore sintering[J].Journal of iron and steel research, international, 2013, 20(6):01-06
[23]
Chen Y C, Tsai P J, Mou J L, et al.A Pilot Study for Determining the Optimal Operation Condition for Simultaneously Controlling the Emissions of PCDDFs and PAHs From the Iron Ore Sintering Process[J].Chemosphere, 2012, 88(11):1324-1331
[24]
Roudier S, Sancho L D, Remus R, et al.Best Available Techniques (BAT) Reference Document for Iron and Steel Production: Industrial Emissions Directive 2010/75/EU: Integrated Pollution Prevention and Control[R]. Joint Research Centre (Seville site), 2013.
[25]
Qu L L, Mao Y L, Jing X, et al.Dioxin emission reduction technologies for sintering process and their present application situation[J].Sintering and Pelletizing, 2015, 40(5):42-47
[26]
Tupperainen K, Halonen I, et al, Ruokojarvi P.Formation of PCDDs and PCDFs in Municipal Waste Incineration and Itsinhibition Mechanism: A Review[J].Chemosphere, 1998, 36(7):1493-1511
[27]
Ooi T C, Lu L.Formation and mitigation of PCDDFs in iron ore sintering[J].Chemosphere, 2011, 85(3):291-299
[28]
Kasama S, Yamamura Y, Watanabe K.Investigation on the dioxin emission from a commercial sintering plant[J].ISIJ international, 2006, 46(7):1014-1019
[29]
Long H M, Jia-xin Li, Wang P.Influence of dioxin reduction on chemical composition of sintering exhaust gas with adding urea[J].Journal of Central South University, 2012, 19(5):1359-1363
[30]
Long H M, WU X J, Chun T J*, et al.A pilot-scale study of selective desulphurization during the iron ore sintering with adding urea[J].International Journal of Minerals, Metallurgy and Materials, 2016, 23(11):1239-1243
[31]
Long H M, WU X J, Chun T J*, et al.Mechanism on Selective Desulphurization in Iron Ores Sintering Process with Adding Urea[J].High Temperature Materials Processing, 2017, 36(2):183-188
[32]
Wu X J, Long H M, Chun T J, et al.Emission reduction of PCDDFs in iron ore sintering process by adding urea[J].Environmental Pollution and Control, 2016, 38(5):61-66
[33]
Tian B, Huang J, Deng X B, et al.Catalytic decomposition of PCDDFs from flue gas[J].Progress in Chemistry, 2010, 22(9):1836-1843
[34]
M?tzing H, Baumann W, Becker B, et al.Adsorption of PCDDF on MWI fly ash[J].Chemosphere, 2001, 42(5):803-809
[35]
Chang M B, Chi K H, Chang-Chien G P.Evaluation of PCDDF congener distributions in MWI flue gas treated with SCR catalysts[J].Chemosphere, 2004, 55(11):1457-1467
[36]
Olson D G, Tsuji K, Shiraishi I.The reduction of gas phase air toxics from combustion and incineration sources using the MET�CMitsui�CBF activated coke process[J].[J].Fuel Processing Technology, 2000, 65:393-405
[37]
Ruegg H, Sigg A.Dioxin removal in a wet scrubber and dry particulate remover[J].Chemosphere, 1992, 25(1-2):143-148
[38]
Tejima H, Nakagawa I, Shinoda T, et al.PCDDsPCDFs reduction by good combustion technology and fabric filter withwithout activated carbon injection[J].Chemosphere, 1996, 32(1):169-175
[39]
Smolka A, Schmidt K G.Gasparticle partitioning before and after flue gas purification by an activated-carbon-filter[J].Chemosphere, 1997, 34(5):1075-1082
[40]
Chi K H, Chang S H, Huang C H, et al.Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption[J].Chemosphere, 2006, 64(9):1489-1498
[41]
Liu X, Ye M, Wang X, et al.Gas-phase and particle-phase PCDD/F congener distributions in the flue gas from an iron ore sintering plant[J].[J].Journal of Environmental Sciences, 2017, 54:239-245
[42]
Zhou X J, Li X D, Xu S X, et al.Dioxins adsorption on porous carbon materials: a review[J].Environment pollution & Control, 2016, 38(1):76-81
[43]
De Jong V, Cieplik M K, Reints W A, et al.A mechanistic study on the catalytic combustion of benzene and chlorobenzene[J].Journal of Catalysis, 2002, 211(2):355-365
[44]
Weber R, Sakurai T, Hagenmaier H.Low temperature decomposition of PCDDPCDF,chlorobenzenes and PAHs by TiO2-based V2O5�CWO3 catalysts[J].Applied Catalysis B: Environmental, 1999, 20(4):249-256
[45]
Bertinchamps F, Gregoire C, Gaigneaux E M.Systematic investigation of supported transition metal oxide based formulations for the catalytic oxidative elimination of (chloro)-aromatics: Part II: Influence of the nature and addition protocol of secondary phases to VOxTiO2[J].Applied Catalysis B: Environmental, 2006, 66(1):10-22
[46]
Yu M, Li W, Li X, et al.Development of new transition metal oxide catalysts for the destruction of PCDD/Fs[J].[J].Chemosphere, 2016, 156:383-391
[47]
Yang C C, Chang S H, Hong B Z, et al.Innovative PCDDF-containing gas stream generating system applied in catalytic decomposition of gaseous dioxins over V2 O5�CWO3TiO2-based catalysts[J].Chemosphere, 2008, 73(6):890-895
[48]
Ishida M, Shiji R, Nie P, et al.Full-scale plant study on low temperature thermal dechlorination of PCDDsPCDFs in fly ash[J].Chemosphere, 1998, 37(9):2299-2308
[49]
Wang Q, Hung P C, Lu S, et al.Catalytic decomposition of gaseous PCDD/Fs over V2O5/TiO2-CNTs catalyst: Effect of NO and NH 3 addition[J]. [J].Chemosphere, 2016, 159:132-137
[50]
Cho C H, Ihm S K.Development of new vanadium-based oxide catalysts for decomposition of chlorinated aromatic pollutants[J].Environmental science & technology, 2002, 36(7):1600-1606
[51]
Wielgosi��ski G, Grochowalski A, Machej T, et al.Catalytic destruction of 1,2-dichlorobenzene on V2O5�CWO3Al2O3�CTiO2 catalyst[J].Chemosphere, 2007, 67(9):S150-S154
[52]
Huang H, Gu Y, Zhao J, et al.Catalytic combustion of chlorobenzene over VOx/CeO2 catalysts[J].[J].Journal of Catalysis, 2015, 326:54-68
[53]
Yu M, Li W, Li X, et al.Development of new transition metal oxide catalysts for the destruction of PCDD/Fs[J]. [J].Chemosphere, 2016, 156:383-391
[54]
Chen Y, Wu Q, Liu K.Dual degradation of gaseous 1, 2-dichlorobenzene and PCDD/Fs using Ce doped VxOy/TiO2 immobilized on cordierite[J]. [J].Chemosphere, 2016, 154:472-481
[55]
Meng Q L, Li Z X, Yang Q W, et al.Application of SCR catalyst to sinter plant for NOdioxins removal[J].Engineering journal of WuHan univerdity, 2012, 45(6):751-756
[56]
Goemans M, Clarysse P, Joannes J, et al.Catalytic NOx reduction with simultaneous dioxin and furan oxidation[J].Chemosphere, 2003, 50(4):489-497
[57]
Yan X M, Li Y R, Zhu T Y, et al.Review of Emission and Simultaneous Control of Multiple Pollutants from Iron-steel Sintering Flue Gas[J].Journal of Environment Engineering Technology, 2015, 5(2):85-90