摘要 At present, the continuous accumulation of the flue gas desulfurization (FGD) gypsum in steel plants leads to the serious environmental issues and resource waste. To achieve green and sustainable development for the steel industry, it is significant to improve the usage of by-product gypsum. Employing the sintering FGD gypsum, ferric oxide, and graphite carbon as raw materials, the effects of the carbon content, reaction time, and molar ratio of CaO to Fe2O3 on the desulfurization rate of gypsum were studied based on the orthogonal experiment. The results show that the order of the three influencing factors on the desulfurization rate of FGD gypsum is: molar ratio of CaO to Fe2O3>reaction time>carbon content. Under the optimal conditions of 20 wt.% carbon content, 4 h reaction time, and 1:1 molar ratio of CaO to Fe2O3, the desulfurization rate of desulfurization gypsum is 95.79%, and 97.57 wt.% of calcium ferrite appears in the solid product, which can be used as sintering additive to increase the economic benefits of enterprises and realize the green ecological development mode of internal generation and internal digestion of solid waste in iron and steel enterprises.
Abstract：At present, the continuous accumulation of the flue gas desulfurization (FGD) gypsum in steel plants leads to the serious environmental issues and resource waste. To achieve green and sustainable development for the steel industry, it is significant to improve the usage of by-product gypsum. Employing the sintering FGD gypsum, ferric oxide, and graphite carbon as raw materials, the effects of the carbon content, reaction time, and molar ratio of CaO to Fe2O3 on the desulfurization rate of gypsum were studied based on the orthogonal experiment. The results show that the order of the three influencing factors on the desulfurization rate of FGD gypsum is: molar ratio of CaO to Fe2O3>reaction time>carbon content. Under the optimal conditions of 20 wt.% carbon content, 4 h reaction time, and 1:1 molar ratio of CaO to Fe2O3, the desulfurization rate of desulfurization gypsum is 95.79%, and 97.57 wt.% of calcium ferrite appears in the solid product, which can be used as sintering additive to increase the economic benefits of enterprises and realize the green ecological development mode of internal generation and internal digestion of solid waste in iron and steel enterprises.
Lin-cheng Liu,Hai-bin Zuo,Wen-guo Liu, et al. Preparation of calcium ferrite by flue gas desulfurization gypsum[J]. Journal of Iron and Steel Research International, 2021, 28(11): 1357-1365.
2021, Vol. 28 
