1 National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 100083, China 2 Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China
Tensile deformation behavior of nickel-free high-manganese austenitic cryogenic-temperature steel
1 National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 100083, China 2 Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China
摘要 Nickel-free high-manganese austenitic Fe–24.4Mn–4.04Al–0.057C steel was produced by smelting, and the homogenized forged billet was hot-rolled. The plastic deformation mechanism was investigated through tensile testing of the hot-rolled sample. Different characterization techniques such as scanning electron microscopy, transmission electron microscopy, electron backscattered diffraction, and X-ray diffraction were used to analyze the microstructural evolution of steel under different strain levels. The steel had a single austenite phase, which was stable during deformation. After hot rolling, annealing twins were observed in the microstructure of the steel. The steel showed an excellent combination of mechanical properties, like a tensile strength of 527 MPa, impact energy of 203 J at - 196 °C, and an elongation of 67% till fracture. At the initial deformation stage, the dislocations were generated within the austenite grains, entangled and accumulated at the grain boundaries and annealing twin boundaries. Annealing twins participated in plastic deformation and hindered the dislocation movement. As the deformation progressed, the dislocation slip was hindered and produced stress concentration, and the stacking faults evolved into mechanical twins, which released the stress concentration and delayed the necking.
Abstract:Nickel-free high-manganese austenitic Fe–24.4Mn–4.04Al–0.057C steel was produced by smelting, and the homogenized forged billet was hot-rolled. The plastic deformation mechanism was investigated through tensile testing of the hot-rolled sample. Different characterization techniques such as scanning electron microscopy, transmission electron microscopy, electron backscattered diffraction, and X-ray diffraction were used to analyze the microstructural evolution of steel under different strain levels. The steel had a single austenite phase, which was stable during deformation. After hot rolling, annealing twins were observed in the microstructure of the steel. The steel showed an excellent combination of mechanical properties, like a tensile strength of 527 MPa, impact energy of 203 J at - 196 °C, and an elongation of 67% till fracture. At the initial deformation stage, the dislocations were generated within the austenite grains, entangled and accumulated at the grain boundaries and annealing twin boundaries. Annealing twins participated in plastic deformation and hindered the dislocation movement. As the deformation progressed, the dislocation slip was hindered and produced stress concentration, and the stacking faults evolved into mechanical twins, which released the stress concentration and delayed the necking.
Xin-tian Wang,Hui-bin Wu,Yang Gu, et al. Tensile deformation behavior of nickel-free high-manganese austenitic cryogenic-temperature steel[J]. Journal of Iron and Steel Research International, 2022, 29(5): 793-801.