1 School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China 2 State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China 3 Metallurgical and Building Materials Business Department, China International Engineering Consulting Corporation, Beijing 100048, China
Evolution of inclusions in vacuum induction melting of superalloys containing 70% return material
1 School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China 2 State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China 3 Metallurgical and Building Materials Business Department, China International Engineering Consulting Corporation, Beijing 100048, China
摘要 The variation law of inclusions type and size in the vacuum induction melting process and ingot of Ni-based superalloy containing 70% return material was studied by industrial test sampling, and the mechanism of inclusions formation was analyzed with thermodynamic calculations. The results show that there are mainly two types of composite inclusions in the vacuum induction melting of Ni-based superalloys, which are nitride- and oxide-based composite inclusions, like Al2O3– SiO2–Cr2O3, TiN–(Mo, Nb)C, etc. The type and proportion of inclusions from the center to the edge of the vacuum induction ingot did not change significantly. The number density of inclusions from the center to the edge of the ingot varied less, and the size of inclusions became smaller from the center to the edge. In addition, thermodynamic calculations show that oxides (M2O3) are present in the liquid phase and mainly contain Al, Ti, Cr, Fe and O elements. The nitride consists mainly of Ti and N and contains small amounts of Cr, C, Nb, and Mo elements. This is consistent with the results of industrial tests. As the temperature decreases, the precipitation phases such as M2O3, MN, γ, MC, δ, γ‘ and l phases are gradually precipitated, where oxides and nitrides are present in the liquid phase. The contents of O and N elements are the main influencing factors for the inclusions content and precipitation temperature; when the nitrogen content is reduced to below 0.0015%, it can make MN precipitate below the liquid-phase line.
Abstract：The variation law of inclusions type and size in the vacuum induction melting process and ingot of Ni-based superalloy containing 70% return material was studied by industrial test sampling, and the mechanism of inclusions formation was analyzed with thermodynamic calculations. The results show that there are mainly two types of composite inclusions in the vacuum induction melting of Ni-based superalloys, which are nitride- and oxide-based composite inclusions, like Al2O3– SiO2–Cr2O3, TiN–(Mo, Nb)C, etc. The type and proportion of inclusions from the center to the edge of the vacuum induction ingot did not change significantly. The number density of inclusions from the center to the edge of the ingot varied less, and the size of inclusions became smaller from the center to the edge. In addition, thermodynamic calculations show that oxides (M2O3) are present in the liquid phase and mainly contain Al, Ti, Cr, Fe and O elements. The nitride consists mainly of Ti and N and contains small amounts of Cr, C, Nb, and Mo elements. This is consistent with the results of industrial tests. As the temperature decreases, the precipitation phases such as M2O3, MN, γ, MC, δ, γ‘ and l phases are gradually precipitated, where oxides and nitrides are present in the liquid phase. The contents of O and N elements are the main influencing factors for the inclusions content and precipitation temperature; when the nitrogen content is reduced to below 0.0015%, it can make MN precipitate below the liquid-phase line.
Jin-guo Gao,Shu-lei Yang,Shu-feng Yang, et al. Evolution of inclusions in vacuum induction melting of superalloys containing 70% return material[J]. Journal of Iron and Steel Research International, 2024, 31(3): 719-728.
2024, Vol. 31 
