|
|
Application of Geometric Midline Yield Criterion for Strip Drawing |
WANG Gen-ji DU Haijun ZHAO De-wen LIU Xiang-hua WANG Guo-dong |
|
|
Abstract In this paper, a new linear yield criterion expressed by the geometric midline of error triangle between Tresca and Twin shear stress yield loci on the ��-plane in Haigh-Westergaard space is introduced. The criterion is written in terms of the principal values of stress deviator and called GM yield criterion for short. Together with a Cartesian coordinate velocity field different from Avitzur��s, the GM criterion is used to get a analytical solution for strip drawing .With working example of the strip drawing through wedge-shaped die, the calculated results of relative drawing stress by the GM criterion are compared with those by Mises criterion from Avitzur formula. It turns out that the calculated results according to analytical solution of present paper are in good agreement with the numerical solution by Avitzur formula
|
Received: 14 April 2008
|
|
|
|
[1] |
Dian-hua ZHANG,Jian-zhao CAO,Jiu-jing XU,Wen PENG,De-wen ZHAO. Simplified Weighted Velocity Field for Prediction of Hot Strip Rolling Force by Taking into Account Flattening of Rolls[J]. Chinese Journal of Iron and Steel, 2014, 21(7): 637-643. |
[2] |
Jian-zhao CAO,De-wen ZHAO,Shun-hu ZHANG,Wen PENG,Shu-zong CHEN,Dian-hua ZHANG. Analysis of Hot Tandem Rolling Force with Logarithmic Velocity Field and EA Yield Criterion[J]. Chinese Journal of Iron and Steel, 2014, 21(3): 295-299. |
[3] |
ZHAO De-wen,ZHANG Shun-hu,LI Can-ming,SONG Hong-yu,WANG Guo-dong. Rolling With Simplified Stream Function Velocity and Strain Rate Vector Inner Product[J]. Chinese Journal of Iron and Steel, 2012, 19(3): 20-24. |
|
|
|
|