|
|
Roll Shape Setting Technology of Hot Galvanizing and Planishing Mill |
BAI Zhen��hua1,2,YANG Li��po1,2,LI Xing��dong1,2,GU Ting��quan3 |
1. Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, Hebei, China;2. College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China; 3. Technique Center, Baoshan Iron and Steel Co Ltd, Shanghai 210900, China |
|
|
Abstract A roll shape setting model was built for the hot galvanizing and planishing mill. The uniform transversal distributions of the front tension in the exit and the unit pressure were considered as the objective function. At the same time, the quality of the products, the stability of zinc layer, and the homogeneity of spangles were of considerable significance in the planishing process. The model was applied to the roll shape setting of the 1800 cold rolling 3#CGL hot galvanizing and planishing mill of Baosteel Co Ltd. After being planished, the flatness of a strip that was less than 6 I was more than 97%, and the flatness of others were less than 10 I; the pass percentage of the zinc layers reached 100%.
|
Received: 01 January 1900
|
|
|
|
[1] |
Hai-yan Tang*,Yong Wang,Guang-hui Wu,Peng Lan,Jia-quan Zhang. Inclusion evolution in 50CrVA spring steel by optimization of refining slag[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 879-887. |
[2] |
Yong Li,Lei Fang. Robust multi-objective optimization of rolling schedule for tandem cold rolling based on evolutionary direction differential evolution algorithm[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 795-802. |
[3] |
Wei Zhang,,Zheng-liang Xue,Ju-hua Zhang,Wei Wang,Chang-gui Cheng,Zong-shu Zou. Medium oxygen enriched blast furnace with top gas recycling strategy[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 778-786. |
[4] |
Bang-fu Huang,,*,Nai-yuan Tian,Zhe Shi,,Zhi-wei Ma,. Steel ladle exchange models during steelmaking and continuous casting process[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 617-624. |
[5] |
Qing Shao*,Tao Xu,Tatsuo Yoshino,Nan Song. Multi-objective optimization of gas metal arc welding parameters and sequences for low-carbon steel (Q345D) T-joints[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 544-555. |
[6] |
Ke-lu WANG,Shi-qiang LU,Xian-juan DONG,Xin LI,De-lai OUYANG. Deformation Behavior of Ti-5.6Al-4.8Sn-2.0Zr-1.0Mo-0.35Si-0.85Nd Alloy in ��/Quasi-�� Forging Process[J]. Chinese Journal of Iron and Steel, 2016, 23(12): 1297-1302. |
|
|
|
|