|
|
Numerical Analysis of Electromagnetic Field and Flow Field in High Casting Speed Slab Continuous Casting Mold WithTraveling Magnetic Field |
WANG Hong��dan, ZHU Miao yong, YU Hai��qi |
|
|
Abstract A three-dimensional mathematical model for describing the electromagnetic field and flow field of molten steel in high casting speed slab continuous casting mold with electromagnetic level stabilizer (EMLS) system was developed, in which the effects of current intensity and frequency on the electromagnetic field and flow field were considered. Simulation results indicate that the electromagnetic force (EMF) along the mold width direction presents the centre-symmetric double-peak parabola distribution. The EMLS system leads to the flow velocity of molten steel decreases, especially near the free surface. Both the EMF increases with the current intensity and frequency (in the range of optimum frequency value), so the flow velocity of molten steel in the mold decreases obviously. As the current intensity increases from 800 A to 1000 A, the maximum free surface velocity decreases from 0.515 m/s without magnetic field to 0.155 m/s and 0.12 m/s, respectively. While the current frequency increases from 2 Hz to 6 Hz, the maximum surface velocity decreases from 0.177 m/s to 0.101m/s. The molten steel flow in mold is influenced obviously by the current intensity and frequency.
|
Received: 07 December 2009
|
Corresponding Authors:
WANG Hong-Dan
|
|
|
|
[1] |
Guang-sheng WEI,,Rong ZHU,,Ting CHENG,Fei ZHAO. Numerical Simulation of Jet Behavior and Impingement Characteristics of Preheating Shrouded Supersonic Jets[J]. Chinese Journal of Iron and Steel, 2016, 23(10): 997-1006. |
[2] |
Wen-jie WU , Hui-xiang YU, Xin-hua WANG, Hai-bo LI , Ke LIU. Optimization on Bottom Blowing System of a 210 t Converter[J]. Chinese Journal of Iron and Steel, 2015, 22(Supplement 1): 80-86. |
[3] |
De-wei LI,Zhi-jian SU,Katsukiyo MARUKAWA,Ji-cheng HE. Simulation on Effect of Divergent Angle of Submerged Entry Nozzle on Flow and Temperature Fields in Round Billet Mold in Electromagnetic Swirling Continuous Casting Process[J]. Chinese Journal of Iron and Steel, 2014, 21(2): 159-165. |
[4] |
LI Jiao,WEN Guang-hua,TANG Ping,ZHU Ming-mei, GAO Jian-jun,LIU Hai-lan. Fluid Flow and Inclusion Motion in a Multi-Heat Teeming Tundish for Heavy Steel Ingot[J]. Chinese Journal of Iron and Steel, 2012, 19(11): 19-26. |
[5] |
LI Jun��guo,ZENG Ya��nan,WANG Jian��qiang,HAN Zhi��jie. Simulation of Flow Field of Oxygen Lance Gas Jet Utilized for 50 t Converter[J]. Chinese Journal of Iron and Steel, 2011, 18(4): 11-18. |
[6] |
YUE Qiang. Water Modeling of a Swirling Flow Tundish for Steel Continuous Casting[J]. Chinese Journal of Iron and Steel, 2009, 16(5): 17-17. |
|
|
|
|