|
|
Combustion Characteristics of Polyethylene and Coal Powder at High Temperature |
LONG Shi��gang,CAO Feng,WANG Si��wei,SUN Liu��heng, PANG Jian��ming,SUN Yu��ping |
School of Metallurgy and Resource, Anhui University of Technology, Ma��anshan 243002, Anhui, China |
|
|
Abstract To study the combustion characteristics of the polyethylene (PE) particle and coal powder at blast temperature of the blast furnace, the contents of CO and CO2 of off��gas during the combustion of PE particle and coal powder at the 1 200 �� and 1 250 �� were measured using carbon monoxide and carbon dioxide infrared analyzer, and then the corresponding combustion ratio was calculated. The results showed that when the temperature is high, the combustion speed of PE and coal powder is high and the corresponding combustion ratio is high. Whereas, the combustion speed and ratio of PE are much higher than those of coal powder.
|
Received: 01 January 1900
|
|
|
|
[1] |
Guo-qing LIU,Qing-cai LIU,Xiao-qing WANG,Fei MENG,Shan REN,Zhen-peng JI. Combustion Characteristics and Kinetics of Anthracite Blending with Pine Sawdust[J]. Chinese Journal of Iron and Steel, 2015, 22(9): 812-817. |
[2] |
Xiang-dong XING,,Jian-liang ZHANG,Zhen-yang WANG,Ke-xin JIAO,Xing-le LIU,Shan REN. Reduction of Pyrite Cinder Pellets Mixed with Coal Powder[J]. Chinese Journal of Iron and Steel, 2014, 21(7): 653-659. |
|
|
|
|