|
|
Effect of Structure Parameters on Power and Magnetic Field in Electromagnetic Soft��Contact Continuous Casting System |
DENG An��yuan,WANG En��gang,HE Ji��cheng |
Key Laboratory of National Education Ministry for Electromagnetic Processing of Materials, Northeastern University, Shenyang 110004, Liaoning, China |
|
|
Abstract To design a power source system and mold for electromagnetic soft��contact continuous casting process and to theoretically estimate the heat losses from the charges and the system power, the effect of structure parameters on system power and magnetic flux density distribution was calculated using finite element method. The results show that as for electromagnetic soft��contact continuous casting system with partial��segment type mold, the power consumption is much more than that with a full��segment type mold; about 62% of electric power is dissipated in the mold, and the effective acting range of magnetic field is relatively narrow. Optimizing mold structure is a crucial measure of remarkably reducing mold power consumption and saving electric energy. Increasing slit number, width, and length can remarkably increase the magnetic flux density in the mold and can reduce the electric energy consumption. Among structure parameters, slit number and slit width are relatively more effective to reduce energy consumption. For a round billet electromagnetic continuous casting system with diameter of 178 mm, the reasonable slit number, width, and length are about 24-32, 0��5-1��0 mm, and 160 mm, respectively.
|
Received: 01 January 1900
|
|
|
|
[1] |
Zhong Zheng,*,Jian-yu Long,Xiao-qiang Gao. Production scheduling problems of steelmaking-continuous casting process in dynamic production environment[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 586-594. |
[2] |
Long Guo,Xing-zhong Zhang*,Chang-xi Feng. Continuous bending and straightening technology of Q345c slab based on high-temperature creep deformation[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 595-600. |
[3] |
Bang-fu Huang,,*,Nai-yuan Tian,Zhe Shi,,Zhi-wei Ma,. Steel ladle exchange models during steelmaking and continuous casting process[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 617-624. |
[4] |
Yu Xu,,En-gang Wang,,*,Zhuang Li,,An-yuan Deng,. Effects of vertical electromagnetic stirring on grain refinement and macrosegregation control of bearing steel billet in continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 483-489. |
[5] |
Chao Zhou,,Xing-zhong Zhang,*,Fang Wang,Ping-fei Liu,Yi-ming Fang. Mechanism analysis of non-sinusoidal oscillation of continuous casting mold synchronously driven by double servomotors[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 251-257. |
[6] |
Yang Liu,Xin-hua Liu*,Hua-dong Fu,Min-xuan Lou,Jian-xin Xie. Effects of process parameters on surface quality, composition segregation, microstructure and properties of QSn6.5-0.1 alloy slabs fabricated by HCCM horizontal continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 273-281. |
|
|
|
|