|
|
Real Heat Flux Analysis of Continuously Casting Round Billet |
ZHAN Hui��ying,WANG Xu��dong,GUO Liang��liang,YAO Man |
School of Material Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China |
|
|
Abstract The distributions of heat flux along the height and the circumferential direction of round billet mould were measured continuously. The influence of casting speed, carbon content, powder, and pouring temperature on the average longitudinal and circumferential heat flux in the ��high heat flux region�� was discussed. The experimental and analytical results provide a basis for an intelligent mould with online detection of defects, adjustment of operational parameters, optimization of the monitoring system, and even prediction of abnormal heat transfer.
|
Received: 01 January 1900
|
|
|
|
[1] |
Zhong Zheng,*,Jian-yu Long,Xiao-qiang Gao. Production scheduling problems of steelmaking-continuous casting process in dynamic production environment[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 586-594. |
[2] |
Long Guo,Xing-zhong Zhang*,Chang-xi Feng. Continuous bending and straightening technology of Q345c slab based on high-temperature creep deformation[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 595-600. |
[3] |
Bang-fu Huang,,*,Nai-yuan Tian,Zhe Shi,,Zhi-wei Ma,. Steel ladle exchange models during steelmaking and continuous casting process[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 617-624. |
[4] |
Yu Xu,,En-gang Wang,,*,Zhuang Li,,An-yuan Deng,. Effects of vertical electromagnetic stirring on grain refinement and macrosegregation control of bearing steel billet in continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 483-489. |
[5] |
Chao Zhou,,Xing-zhong Zhang,*,Fang Wang,Ping-fei Liu,Yi-ming Fang. Mechanism analysis of non-sinusoidal oscillation of continuous casting mold synchronously driven by double servomotors[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 251-257. |
[6] |
Yang Liu,Xin-hua Liu*,Hua-dong Fu,Min-xuan Lou,Jian-xin Xie. Effects of process parameters on surface quality, composition segregation, microstructure and properties of QSn6.5-0.1 alloy slabs fabricated by HCCM horizontal continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 273-281. |
|
|
|
|