|
|
Influence of Solution Treatment on Microstructure of AEREX350 Alloy |
WAN Wen-juan, HAN Guang-wei |
|
|
Abstract The microstructure of hot-rolled AEREX350 alloy under various heat treatments was investigated by means of scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It is found that with increasing temperature, �� phase precipitated firstly at grain boundaries in parallel at 800�� and then began precipitating within grains at about 980��. The �� phase precipitating at grain boundaries played a role on preventing the migration of grain boundaries, and that precipitating within grains would develop as Widmanstätten structure with further increasing temperature. Both �� phase dissolved at the temperature between 1085�� and 1095��, resulting in grain growth promptly due to release of pinning effect on grain boundaries. �á� phase precipitated during the process of air cooling after hot-roll, and dissolved at temperature between 1010�� and 1020��.
|
Received: 26 November 2008
|
|
|
|
[1] |
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 966-973. |
[2] |
Xiao-li Zhao,,Yong-jian Zhang,Cheng-wei Shao,Wei-jun Hui,Han Dong. Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 830-837. |
[3] |
Min-qiang Gao,Ying-dong Qu,Guang-long Li,Jun-hua You,Rong-de Li. Cementites decomposition of a pearlitic ductile cast iron during graphitization annealing heat treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 838-843. |
[4] |
Hang-wei Zhou,,Hui-qun Liu,,Dan-qing Yi,,Yu Xiao,,Xiao-long Zhao,Jian Wang,Qi Gao. Effect of �� phase on fatigue crack growth of Ti-6242 alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 811-822. |
[5] |
Zhi-gang Song,En-xiang Pu,. Precipitated phases of superaustenitic stainless steel 654SMO[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 743-749. |
[6] |
Reng-chong Xu,,Yan-lin He,,Hu Jiang,,Hua Wang,,Na-qiong Zhu,,Xiao-gang Lu,, Lin Li,. Microstructures and mechanical properties of ferrite-based lightweight steel with different compositions[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 737-742. |
|
|
|
|