|
|
|
| New Method for Evaluating Thermal Wear of Rolls in Rolling Process |
| LI Chang��sheng,LIU Xiang��hua,WANG Guo��dong |
| State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China |
|
|
|
|
Abstract A new method was developed by a thermal wear machine to evaluate the thermal wear of rolls in steel rolling process. The steel strip and rolls were simulated by upper and lower heating disks. The upper heating disk could be kept at a temperature of over 900 �� by induction heating. The pressure between the disks as high as 323��2 MPa could be achieved and the slipping rate could be 12��7%. The thermal wear of high speed steel (HSS) roll material, the wear rate of the HSS roll, and the SEM morphology of a worn HSS roll surface were investigated. This method was useful and could be employed to simulate friction and wear between strip and roll during the strip rolling process.
|
|
Received: 01 January 1900
|
|
|
|
| [1] |
Yong Li,Lei Fang. Robust multi-objective optimization of rolling schedule for tandem cold rolling based on evolutionary direction differential evolution algorithm[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 795-802. |
| [2] |
Ri-huan Lu,Xiang-hua Liu,Shou-dong Chen,Lu Feng,Xian-lei Hu,Li-zhong Liu. Springback behavior of tailor rolled blank in U-shape forming[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 787-794. |
| [3] |
Luis Daniel Aguilera Camacho,Santos Garc��a Miranda,Karla Judith Moreno. Tribological performance of uncoated and TiCN-coated D2, M2 and M4 steels under lubricated condition[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 823-829. |
| [4] |
Hong-bo Pan,,*,Meng-jiao Zhang,Wei-ming Liu,,Jun Yan,,Hui-ting Wang,Chang-sheng Xie,Zhan Guo. Effects of micro-alloying and production process on precipitation behaviors and mechanical properties of HRB600[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 536-543. |
| [5] |
Zi-long Zhao,,Xue-gang Xing,Yi Luo,Yi-de Wang,,Wei Liang,*. Influence of Al-Si additions on mechanical properties and corrosion resistance of Mg-8Li dual-phase alloys[J]. Chinese Journal of Iron and Steel, 2017, 24(4): 426-429. |
| [6] |
Feng Chen,Yu-feng Guo*,Tao Jiang,Fu-qiang Zheng,Shuai Wang,Ling-zhi Yang. Effects of high pressure roller grinding on size distribution of vanadium-titanium magnetite concentrate particles and improvement of green pellet strength[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 266-272. |
|
|
|
|
2008, Vol. 15 
