|
|
Industrial Research on Broadening of Slab in Continuous Casting Process |
FU Jian-xun, LI Jing-she |
|
|
Abstract The broadening of slab was investigated on the basis of several industrial manufactures of continuous casting. The results show that slab broadening commonly exists in the process of continuous casting. It is found that there are few reports on it until now. In order to find out the reasons of slab broadening, we checked the effect of change of mold size, excepting technological parameters, conditions of soft reduction, and contraction of roll gap on slab broadening. Our examinations exclude the possibility of change of mold size, excepting technological parameters to be the causes of broadening of slab. The broadening of slab probably results from the static pressure of molten steel and the force from driving rolls. At the same time, online observations on three kinds of steel in the process of continuous casting reveal that the average objective ratio of slab broadening ranges from 1.27 % to 3.00 %, and even arrives at 4.4 %. In addition, the width of mold and formulas of calculating the broadening of slab was deduced.
|
Received: 27 May 2009
|
|
|
|
[1] |
Wan-ming Li,Zhou-hua Jiang,,*,Xi-min Zang,Xin Deng. Modeling of flow and temperature distribution in electroslag remelting withdrawal process for fabricating large-scale slab ingots[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 569-578. |
[2] |
Zhong Zheng,*,Jian-yu Long,Xiao-qiang Gao. Production scheduling problems of steelmaking-continuous casting process in dynamic production environment[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 586-594. |
[3] |
Long Guo,Xing-zhong Zhang*,Chang-xi Feng. Continuous bending and straightening technology of Q345c slab based on high-temperature creep deformation[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 595-600. |
[4] |
Bang-fu Huang,,*,Nai-yuan Tian,Zhe Shi,,Zhi-wei Ma,. Steel ladle exchange models during steelmaking and continuous casting process[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 617-624. |
[5] |
Yu Xu,,En-gang Wang,,*,Zhuang Li,,An-yuan Deng,. Effects of vertical electromagnetic stirring on grain refinement and macrosegregation control of bearing steel billet in continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 483-489. |
[6] |
Chao Zhou,,Xing-zhong Zhang,*,Fang Wang,Ping-fei Liu,Yi-ming Fang. Mechanism analysis of non-sinusoidal oscillation of continuous casting mold synchronously driven by double servomotors[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 251-257. |
|
|
|
|