|
|
|
| Effect of Rare Earth on Microstructures and Properties of High Speed Steel With High Carbon Content |
| YANG Jun1,2,ZOU De��ning1,LI Xiao��ming1,DU Zhong��ze1 |
| 1. School of Metallurgical Engineering, Xi��an University of Architecture and Technology, Xi��an 710055, Shaanxi, China; 2. State Key Laboratory for Mechanical Behavior of Materials, Xi��an Jiaotong University, Xi��an 710049, Shaanxi, China |
|
|
|
|
Abstract The effects of rare earth (RE) on the microstructures and properties of high carbon high speed steel (HCHSS) were investigated. The results show that when suitable RE is added to the HCHSS, the effect of RE on the austenite and eutectic carbides is obvious. The austenite grain and coarse eutectic structure are refined, and flake carbides in the eutectic structures become short and fine. After heat treatment, most of the eutectic carbides are spheroidized and distributed in a uniform manner. The hardness and red hardness of modified HCHSS are slightly increased; impact toughness is greatly increased by 37��81% and reaches 10��17 J/cm2. The mechanism by which RE improves the structures and properties of HCHSS is also analyzed.
|
|
Received: 01 January 1900
|
|
|
|
| [1] |
Hai-yan Tang*,Yong Wang,Guang-hui Wu,Peng Lan,Jia-quan Zhang. Inclusion evolution in 50CrVA spring steel by optimization of refining slag[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 879-887. |
| [2] |
Zong-ye Ding,Di Zhang,Qiao-dan Hu,,*,Long Zeng,Jian-guo Li,. Constitutive analysis and optimization on hot working parameters of as-cast high Cr ultra-super-critical rotor steel with columnar grains[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 916-924. |
| [3] |
Hao Li,Yan-chong Yu,,Xiang Ren,Shao-hua Zhang,She-bin Wang,,*. Evolution of Al2O3 inclusions by cerium treatment in low carbon high manganese steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 925-934. |
| [4] |
Yang Yun,Qing-wu Cai,,Bao-sheng Xie,*,Shuang Li. Effect of tempering temperature on strain hardening exponent and flow stress curve of 1000 MPa grade steel for construction machinery[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 950-956. |
| [5] |
Yuan-ji Shi,Lan-ji Liu,Lei Zhang,Li-jun Zhang,Li Zheng,Run-xia Li,Bao-yi Yu*. Effect of squeeze casting process on microstructures and flow stress behavior of Al-17.5Si-4Cu-0.5Mg alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 957-965. |
| [6] |
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 966-973. |
|
|
|
|
2007, Vol. 14 
