|
|
Analysis of Strip Temperature in Hot Rolling Process by Finite Element Method |
MEI Rui-bin��LI Chang-sheng |
|
|
Abstract The program was developed by finite element method to calculate the temperature distribution in hot strip rolling. The heat transfer coefficient of air cooling, water cooling and thermal resistance between work roll and strip were analyzed. A new heat generate rate model was proposed according to the influence of source current density, work frequency, air gap and distance to edge on induction heating by finite element method (FEM). The heat generate rate was considered into the thermal analysis to predict the temperature distribution in the induction heating. The influence of induction heating on the strip temperature was investigated with different strip thicknesses. The temperature difference became more and more obvious with the increase of thickness. The strip could be heated quickly by the induction heating both in surface and center because of the thermal conductivity and skin effect. The heat loss of radiation has important influence on the surface temperature. The surface temperature could be heated quickly with high frequency when the strip is thicker.
|
Received: 08 September 2008
|
|
|
|
[1] |
Rong-sheng QI,Miao JIN,Xin-gang LIU,Bao-feng GUO. Formation Mechanism of Inclusion Defects in Large Forged Pieces[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 531-538. |
[2] |
Jos�� Angel BARRIOS,C��sar VILLANUEVA,Alberto CAVAZOS,Rafael COL��S. Fuzzy C-means Rule Generation for Fuzzy Entry Temperature Prediction in a Hot Strip Mill[J]. Chinese Journal of Iron and Steel, 2016, 23(2): 116-123. |
[3] |
Wei-gang LI,Chao LIU,Ning FENG,Xi CHEN,Xiang-hua LIU. Friction Estimation and Roll Force Prediction during Hot Strip Rolling[J]. Chinese Journal of Iron and Steel, 2016, 23(12): 1268-1276. |
[4] |
Dian-tao ZHANG,,Zhen LI,,Yun-xiang TONG,,Yu-feng ZHENG,,Li LI,. New Formulas of Shear Strain during Equal-channel Angular Pressing Process with Consideration of Influences of Velocity and Motion Trajectory[J]. Chinese Journal of Iron and Steel, 2016, 23(10): 1020-1027. |
[5] |
Qiu-han LI,Chi ZHANG,Hu CHEN,Hao CHEN,Zhi-gang YANG. Microstructural Evolution of a Hypoeutectoid Pearlite Steel under Rolling-sliding Contact Loading[J]. Chinese Journal of Iron and Steel, 2016, 23(10): 1054-1060. |
[6] |
Xu CHEN,Fu-bin LIU,Zhou-hua JIANG,Hua-bing LI,Xi-min ZANG,Xin DENG. Mathematical Modeling of ESR Process for Hollow Ingot with Current Supplying Mould[J]. Chinese Journal of Iron and Steel, 2015, 22(3): 192-199. |
|
|
|
|