|
|
|
| Effect of Induction Heat on Initial Solidification During Electromagnetic Continuous Casting of Steel |
| WAGNG Hong-Ming , LI Gui-rong |
|
|
|
|
Abstract Aiming at the process of electromagnetic continuous casting (EMCC), a three dimensional finite element model on electromagnetic field and temperature field was developed through the commercial software ANSYS to investigate the effects of induction heat of high frequency electromagnetic field on the early solidification process of molten steel in soft contact mold under various conditions of exciting current parameters. The results show that the induction heat has significant effects on the early solidification process, which appear as increasing the billet surface temperature, thinning the initial solidified shell and lowering the starting point of the initial solidification. The increases of exciting current frequency and density make the effects of induction heat on solidification process increased remarkably. Especially, with the increase of exciting current frequency, the early solidification process and shell growth become non-uniform in billet circumferential direction. Morever, if the exciting current density exceeds a certain value, there occurs a high temperature region in the top of molten steel column, and then the initial solidification rate is decreased greatly.
|
|
Received: 27 March 2009
|
|
Corresponding Authors:
WAGNG Hong-Ming
|
|
|
|
| [1] |
Da-shan Sui,*,Hai-ming Zhang,Hong-yang Zhu,Zhe Zhu,Zhen-shan Cui. Effects of process parameters on fragment and refinement of millimeter-grade coarse grains for 316LN steel during hot cogging[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 529-535. |
| [2] |
Zheng-wei GU,,Meng-meng L��,,Xin LI,,Hong XU,. Stretch Bending of Z-section Stainless Steel Profile[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 525-530. |
| [3] |
Cun-jiang TANG,Shi-long LIU,Cheng-jia SHANG. Micromechanical Behavior and Failure Mechanism of F/B Multi-phase High Performance Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(5): 489-494. |
| [4] |
Yang LI,,An-yuan DENG,,Chuan-qi YIN,,Sai-juan ZHANG,,En-gang WANG,. Effects of Magnetic Pressure Constraint on Dynamic Deformation and Oscillation Behavior of Metal Free Surface[J]. Chinese Journal of Iron and Steel, 2016, 23(11): 1134-1141. |
| [5] |
Jian-an ZHOU, Kang WEI, Zhi-qiang LI , Zhong-qiu LIU , Xue-kai JIANG, Hong-wei NI. Numerical Simulation of Gas-powder Flow in a Slot-plug Mixing Chamber[J]. Chinese Journal of Iron and Steel, 2015, 22(Supplement 1): 24-29. |
| [6] |
Peng-huan LI, Qiao-jun WU, Wen-hao HU, Jian-song YE. Mathematical Simulation of Behavior of Carbon and Oxygen in RH Decarburization[J]. Chinese Journal of Iron and Steel, 2015, 22(Supplement 1): 63-67. |
|
|
|
|
2010, Vol. 17 
