Temperature Correction for Thickness Measurements of Hot Rolled Steel Plates

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (0 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract Measuring the thickness of steel plates during the hot rolling process is crucial for getting the necessary feedback to obtain the desired values at room temperature. The dilatation and the phase transformations that steel suffers during it's heating and subsequent cooling when rolled strongly influence the results of thickness measurements. The radiometric method provides the necessary means to make real-time and fully automatized measurements of steel thickness during rolling, if only the temperature correction is precisely known and taken into consideration. This article proves that the experimental results concerning the relative variation of steel thickness and of it's corresponding mass-thickness variation can be correctly explained by means of the theory of metal dilatation correlated with the theory of nuclear radiation absorption when passing through a metal or metallic alloy, such as steel.

Key words�� steel hot rolling dilatation phase transformation temperature correction gamma rays X-rays attenuation

Received: 02 June 2009

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	C Gheorghies
	S Condurache��Bota

Cite this article:

C Gheorghies,S Condurache��Bota. Temperature Correction for Thickness Measurements of Hot Rolled Steel Plates[J]. Chinese Journal of Iron and Steel, 2010, 17(12): 23-23.

URL:

http://gt.chinamet.cn/Jweb_gtyjxb_en/EN/ OR http://gt.chinamet.cn/Jweb_gtyjxb_en/EN/Y2010/V17/I12/23