|
|
Microstructure and Hardness of T250 Maraging Steel in Heat Affected Zone |
MO De��feng1,HU Zheng��fei1,CHEN Shu��juan1,WANG Chun��xu2,HE Guo��qiu1 |
1. School of Material Science and Engineering, Tongji University, Shanghai 200092, China; 2. Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract Electron��beam (EB) welding was used in T250 maraging steel, microstructures of both base material and heat affected zone (HAZ) were investigated by optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and microhardness was tested. The results showed that during EB welding, the HAZ of T250 maraging steel exhibited a continuous gradient structure. The microstructure of the entire HAZ, from fusion line, could be divided into four zones: fusion zone, overheated zone, transition zone, and hardened zone. The microhardness showed a distinct regularity in each area. The softest region was the fusion zone, whereas the hardest was the hardened zone. In the overheated zone, the hardness increased as the grain size decreased. Furthermore, in the transition zone, the hardness level dropped noticeably. The peak temperature during the thermal cycle had a great influence on the formation of reverted austenite and dissolution of the precipitated particles, which contributed a lot to the microstructure and hardness of this material.
|
Received: 01 January 1900
|
|
|
|
[1] |
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 966-973. |
[2] |
Xiao-li Zhao,,Yong-jian Zhang,Cheng-wei Shao,Wei-jun Hui,Han Dong. Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 830-837. |
[3] |
Hang-wei Zhou,,Hui-qun Liu,,Dan-qing Yi,,Yu Xiao,,Xiao-long Zhao,Jian Wang,Qi Gao. Effect of �� phase on fatigue crack growth of Ti-6242 alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 811-822. |
[4] |
Reng-chong Xu,,Yan-lin He,,Hu Jiang,,Hua Wang,,Na-qiong Zhu,,Xiao-gang Lu,, Lin Li,. Microstructures and mechanical properties of ferrite-based lightweight steel with different compositions[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 737-742. |
[5] |
Wei-jun Hui,*,Na Xiao,Xiao-li Zhao,Yong-jian Zhang,Yu-feng Wu. Effect of vanadium on dynamic continuous cooling transformation behavior of medium-carbon forging steels[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 641-648. |
[6] |
Yong-xing Jiao,Jian-sheng Liu*,Xing-wang Duan,Xiao-hua Zheng,Wen-wu He. Prediction of critical forging penetration efficiency for 06Cr19Ni9NbN steel by dynamic recrystallization[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 649-653. |
|
|
|
|