|
|
|
| Precipitates in Steels With Ti Additive Produced by CSP Process |
| LOU Yan��zhi,LIU De��lu,NI Xiao��qing |
| Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083, China |
|
|
|
|
Abstract Hot strips of low carbon steels with Ti additive [contain C 0��04%-0��07%, Si��0��6%, Mn��0��6%, Ti 0��06%-0��14% (mass percent)] produced by EAF��CSP (Electric Arc Furnaces��Compact Strip Production) process were examined by TEM, HREM and XRD. Carbonitrides with different N/C ratio were found in the samples. The varying composition of the Ti��carbonitrides resulted from the supersaturation of Ti and temperature at which the compound was formed. In the tested steel, total mass fraction of the precipitates including cementite, carbonitride and a small quantity of Fe3O4, Al2O3, Ti2CS and AlN was about 0��305%. XRD results showed that about a quarter of the powder extracted by electrolysis was titanium nitrides, carbonitrides and carbides. Particle arrays formed by interphase precipitation could be observed either in slabs or in hot strips. The dominant reaction mechanisms were discussed. Compared with the conventional cold charge process, small amount of Ti addition would be more effective for precipitation of fine precipitates in the steels produced by CSP process.
|
|
Received: 01 January 1900
|
|
|
|
| [1] |
Zhi-gang Song,En-xiang Pu,. Precipitated phases of superaustenitic stainless steel 654SMO[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 743-749. |
| [2] |
Liang Yang,,Bryan A. Webler,Guo-guang Cheng. Precipitation behavior of titanium nitride on a primary inclusion particle during solidification of bearing steel[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 685-690. |
| [3] |
Zhong-liang Tian,,Sen-bao Jiang,Zheng-zong Chen,Han-sheng Bao,Zheng-dong Liu,*. Microstructural evolution and mechanical properties of a new Ni-based heat-resistant alloy during aging at 750��C[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 513-519. |
| [4] |
Hong-bo Pan,,*,Meng-jiao Zhang,Wei-ming Liu,,Jun Yan,,Hui-ting Wang,Chang-sheng Xie,Zhan Guo. Effects of micro-alloying and production process on precipitation behaviors and mechanical properties of HRB600[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 536-543. |
| [5] |
Qiang Yu,,Chao-fang Dong,*,Jian-xiong Liang,Zhen-bao Liu,Kui Xiao,Xiao-gang Li. Stress corrosion cracking behavior of PH13-8Mo stainless steel in Cl- solutions[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 282-289. |
| [6] |
Juan JIA,Wei-wei ZHU,Xin-li SONG,Ze-xi YUAN. Precipitation Behavior of FeTiP in Ti-added Interstitial Free High Strength Steels[J]. Chinese Journal of Iron and Steel, 2016, 23(7): 692-698. |
|
|
|
|
2009, Vol. 16 
