|
|
Kinetic Model of �Ū�Cu Particle Dissolution in Welding�� Induced HAZ of Copper��Containing Steel |
WANG Qing��feng1,CHAI Feng2,3,CAI Jian��wei1,2,PAN Tao2,SU Hang2 |
1. State Key Laboratory of Metastable Materials Technology and Science, Yanshan University, Qinhuangdao 066004, Hebei, China;2. Division of Structural Material Research, Central Iron and Steel Research Institute, Beijing 100081, China;3. College of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai 200030, China |
|
|
Abstract The kinetics of �Ū�Cu particle dissolution in the matrix of heat affected zone (HAZ) during welding of a copper��containing steel was determined by assembling the welding temperature��time program into a modified Whelan��s solution. The particle dissolution dependence on the degree of ��superheating�� above the equilibrium transformation is demonstrated from the model. In terms of volume fraction of particle dissolution, the HAZ may be classified into three zones, including the undissolving zone, the partially dissolving zone, and the completely dissolving zone, respectively. The numerical solution was in good agreement with the experimental examination finding. The results of model can be used to quantitatively map the �Ū�Cu dissolution zone dependence on the peak temperature of welding thermal cycles and understand the evolution of this transformation during welding.
|
Received: 01 January 1900
|
|
|
|
[1] |
Hai-yan Tang*,Yong Wang,Guang-hui Wu,Peng Lan,Jia-quan Zhang. Inclusion evolution in 50CrVA spring steel by optimization of refining slag[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 879-887. |
[2] |
H. Gonzalez,J.A. Ramos-Banderas,E. Torres-Alonso,G. Solorio-Diaz,C.A. Hern��ndez-Bocanegra,. Multiphase modeling of fluid dynamic in ladle steel operations under non-isothermal conditions[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 888-900. |
[3] |
Zong-ye Ding,Di Zhang,Qiao-dan Hu,,*,Long Zeng,Jian-guo Li,. Constitutive analysis and optimization on hot working parameters of as-cast high Cr ultra-super-critical rotor steel with columnar grains[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 916-924. |
[4] |
Hao Li,Yan-chong Yu,,Xiang Ren,Shao-hua Zhang,She-bin Wang,,*. Evolution of Al2O3 inclusions by cerium treatment in low carbon high manganese steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 925-934. |
[5] |
Yu-cheng Lei,,*,Xiao-kai Guo,Hong-xia Chang,Tian-qing Li,,Qiang Zhu,Gang Chen, Long-ren Xiao. Cavitation erosion behavior of CLAM steel weld joint in liquid lead-bismuth eutectic alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 935-942. |
[6] |
Zhen Cao,Shu-qi Wang*,Ke-zhi Huang,Bo Zhang,Guo-hong Wen,Qiu-yang Zhang,Lan Wang. Effect of artificial tribological layer on sliding wear behavior of H13 steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 943-949. |
|
|
|
|