|
|
Properties of 3Cr2W8V Die Steel With Striations Processed by Laser |
CHEN Li1,3,ZHOU Hong2,ZHANG Zhi��hui3,REN Lu��quan3 |
1. School of Materials Science and Engineering, Changchun University of Technology, Changchun 130012, Jilin, China;2. The Key Laboratory of Automobile Materials of the Ministry of Education, Jilin University, Changchun 130025, Jilin, China;3. The Key Laboratory for Terrain Machinery Bionics Engineering of the Ministry of Education, Jilin University, Changchun 130025, Jilin, China |
|
|
Abstract The striations on the surface of 3Cr2W8V die steel were processed by laser. The microstructure, hardness, wear resistance and thermal fatigue behavior of the specimens processed by laser were measured. The appearance and mechanism of thermal fatigue crack propagation in the zone processed by laser were observed and discussed. The results show that the wear resistance and thermal fatigue resistance of materials processed by laser are all better than those of the unprocessed material. The processed zone by laser plays a role in baffling wearing process and crack propagation. The pile��nail effect of processed zone is the main factor for improving the wear resistance and thermal fatigue resistance of material.
|
Received: 01 January 1900
|
|
|
|
[1] |
Xiao-li Zhao,,Yong-jian Zhang,Cheng-wei Shao,Wei-jun Hui,Han Dong. Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 830-837. |
[2] |
Hong-ru Ren,Jin-tao Gao,Zhe Wang,Chong Li,Fu-qiang Wang,Zhan-cheng Guo. Evolution of microstructure, mechanical and magnetic properties of electrodeposited 50%Ni-Fe alloy foil after thermal treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 844-851. |
[3] |
Reng-chong Xu,,Yan-lin He,,Hu Jiang,,Hua Wang,,Na-qiong Zhu,,Xiao-gang Lu,, Lin Li,. Microstructures and mechanical properties of ferrite-based lightweight steel with different compositions[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 737-742. |
[4] |
Yong-xing Jiao,Jian-sheng Liu*,Xing-wang Duan,Xiao-hua Zheng,Wen-wu He. Prediction of critical forging penetration efficiency for 06Cr19Ni9NbN steel by dynamic recrystallization[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 649-653. |
[5] |
Ming-bo Zhou,Jing-lin Tang,*,Jie Yang,Cun-yu Wang. Tailored properties of a novelly-designed press-hardened 22MnMoB steel[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 508-512. |
[6] |
Zhong-liang Tian,,Sen-bao Jiang,Zheng-zong Chen,Han-sheng Bao,Zheng-dong Liu,*. Microstructural evolution and mechanical properties of a new Ni-based heat-resistant alloy during aging at 750��C[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 513-519. |
|
|
|
|