|
|
|
| Phosphorus Removal of High Phosphorus Iron Ore byGas��Based Reduction and Melt Separation |
| TANG Hui��qing,GUO Zhan��cheng,ZHAO Zhi��long |
|
|
|
|
Abstract A large deposit of high phosphorus iron ore in China contains an average of 1.2% phosphorus and 50% iron and it has not been utilized. In current work, a novel process to remove phosphorus of the ore has been proposed. The novel process has been demonstrated theoretically and experimentally. The theoretical work (numerical simulation) was carried out with HSC chemistry package and a mathematical model developed using the coexistence theory of slag structure. Gas-based reduction and melt separation experiments were then designed and conducted. Simulation results shows that that all iron compounds in the ore could be reduced to metallic iron using CO/ H2 under temperature above 1000K and the yield of iron is more than 90% under either atmosphere; P can not be reduced and exists as Ca3(PO4)2; in the melt separation process, iron metallization ratio, melting temperature and CaO-adding ratio affect the phosphorus partition between slag and molten metal and CaO-adding ratio is the most distinguished parameter. Results of gas-based reduction agreed well with the simulation except for iron metallization ratio being less than predicted. This difference is mainly attributed to kinetic condition. Results of melt separation experiment show most P is left in the slag sample and some P in the metal sample exists as slag inclusion..
|
|
Received: 02 September 2009
|
|
|
|
| [1] |
Da-shan Sui,*,Hai-ming Zhang,Hong-yang Zhu,Zhe Zhu,Zhen-shan Cui. Effects of process parameters on fragment and refinement of millimeter-grade coarse grains for 316LN steel during hot cogging[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 529-535. |
| [2] |
Hui-qing Tang*,Xiu-feng Fu,Yan-qi Qin,Shi-yu Zhao,Qing-guo Xue. Production of low-silicon molten iron from high-silica hematite using biochar[J]. Chinese Journal of Iron and Steel, 2017, 24(1): 27-33. |
| [3] |
Zheng-wei GU,,Meng-meng L��,,Xin LI,,Hong XU,. Stretch Bending of Z-section Stainless Steel Profile[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 525-530. |
| [4] |
Cun-jiang TANG,Shi-long LIU,Cheng-jia SHANG. Micromechanical Behavior and Failure Mechanism of F/B Multi-phase High Performance Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(5): 489-494. |
| [5] |
Yang LI,,An-yuan DENG,,Chuan-qi YIN,,Sai-juan ZHANG,,En-gang WANG,. Effects of Magnetic Pressure Constraint on Dynamic Deformation and Oscillation Behavior of Metal Free Surface[J]. Chinese Journal of Iron and Steel, 2016, 23(11): 1134-1141. |
| [6] |
Jian-an ZHOU, Kang WEI, Zhi-qiang LI , Zhong-qiu LIU , Xue-kai JIANG, Hong-wei NI. Numerical Simulation of Gas-powder Flow in a Slot-plug Mixing Chamber[J]. Chinese Journal of Iron and Steel, 2015, 22(Supplement 1): 24-29. |
|
|
|
|
2010, Vol. 17 
