|
|
Effects of High Strain Rate on Properties and Microstructure Evolution of TWIP Steel Subjected to Impact Loading |
LI Da-zhao, et al |
|
|
Abstract The mechanical properties of the TWIP steel subjected to impact loading at various strain rates were analyzed by the Split Pressure Hopkinson Bar. Meanwhile the microstructure of the TWIP steel fore-and-after the dynamic deformation were characterized and analyzed by optical microscopy (OM), X-ray diffraction (XRD), and transmission electron microscope (TEM). The result shows that when the TWIP steel was deformed under dynamic station, the stress, microshardness and work hardening rate increase with the increment of strain and strain rate; there exist stress fluctuation and decline of work hardening rate for adiabatic temperature rising softening. There exist many pin-like deformation twins in the microstructure of the TWIP steel subjected to impact loading, the grain size after deformation is bigger than that before; the interaction of twins with dislocation and twins with twins, especial emergence of high order deformation twins are the main strengthening mechanisms of the TWIP steel. The nucleation mechanism of deformation twins will be ��rebound mechanism��; the incomplete deformation twins can be observed when the strain rate is low; when strain rate raises, deformation twins unite together; furthermore, deformation twins become denser because the nucleation rating enhancing with strain rate increasing.
|
Received: 02 September 2009
|
Corresponding Authors:
LI Da-Zhao
|
|
|
|
[1] |
Qiu-lin Niu,,Wei-wei Ming,Ming Chen,Si-wen Tang,,Peng-nan Li,. Dynamic mechanical behavior of ultra-high strength steel 30CrMnSiNi2A at high strain rates and elevated temperatures[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 724-729. |
[2] |
Long Guo,Xing-zhong Zhang*,Chang-xi Feng. Continuous bending and straightening technology of Q345c slab based on high-temperature creep deformation[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 595-600. |
[3] |
CHEN Lei����ZHANG Ying-jie��LI Fei��PEI Jian-ming��SONG Lei-jun��JIN Miao. Effect of solution temperature on TRIP/TWIP behavior of a lean duplex stainless steel[J]. Chinese Journal of Iron and Steel, 2017, 52(4): 55-60. |
[4] |
Jiao-jiao Li,Jun-wei Qiao,,*,Karin A. Dahmen,Wei-ming Yang,Bao-long Shen5,Ming-wei Chen6. Universality of slip avalanches in a ductile Fe-based bulk metallic glass[J]. Chinese Journal of Iron and Steel, 2017, 24(4): 366-371. |
[5] |
Jiang-li Ning*,Yun-li Feng,Ming-ming Wang,Shen-bai Zheng,Jie Li. Dependence of tensile properties on microstructural features of bimodal-sized ferrite/cementite steels[J]. Chinese Journal of Iron and Steel, 2017, 24(1): 67-76. |
[6] |
Li-li MA,Ying-hui WEI,,Li-feng HOU,Chun-li GUO. Evaluation on Fatigue Performance and Fracture Mechanism of Laser Welded TWIP Steel Joint Based on Evolution of Microstructure and Micromechanical Properties[J]. Chinese Journal of Iron and Steel, 2016, 23(7): 677-684. |
|
|
|
|