|
|
|
| Thermodynamic Calculations of Melt in Melt Pool During Laser Cladding High Silicon Coatings |
| DONG Dan��yang,LIU Chang��sheng,ZHANG Bin |
| Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, Northeastern University, Shenyang 110004, Liaoning, China |
|
|
|
|
Abstract Based on the Miedema��s formation heat model for binary alloys and the Toop��s asymmetric model for ternary alloys, the formation heat, excess entropy, and activity coefficients of silicon ranging from 1 900 K to 4 100 K in the Fe��Si��C melt formed during the laser cladding high silicon coatings process were calculated. The results indicated that all values of ln��0Si, ��CSi, ��SiSi and ��CSi are negative in the temperature range and these values increase as the temperature increases. And all values of ��SiSi and ��Si��CSi are positive and these values decrease with increasing temperature. The iso��activity lines of silicon are distributed axisymmetrically to the incident laser beam in the melt pool vertical to the laser scanning direction. And the iso��activity lines of silicon in the front of the melt pool along the laser scanning direction are more intensive than those in the back of the melt pool. The activity of silicon on the bottom of the melt pool is lower than that in the effecting center of laser beam on the top surface of the melt pool and it may be the important reason for the formation of the silicides and excellent metallurgical bonding between the laser cladding coating and the substrate.
|
|
Received: 01 January 1900
|
|
|
|
| [1] |
Jia-long Tian,,Wei Wang,,Wei Yan,,Zhou-hua Jiang,Yi-yin Shan,,Ke Yang. Microstructure characteristics of segregation zone in 17-4PH stainless steel piston rod[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 718-723. |
| [2] |
Dan-yang Lin,Nan-nan Zhang,*,Bin He,Guang-wei Zhang,,Yue Zhang,De-yuan Li. Tribological properties of FeCoCrNiAlBx high-entropy alloys coating prepared by laser cladding[J]. Chinese Journal of Iron and Steel, 2017, 24(2): 184-189. |
| [3] |
Si-qian Bao,,*,Yang Xu,Gang Zhao,,Xiang-bin Huang,Huan Xiao,Chuan-long Ye, Na-na Song,Qing-ming Chang. Microstructure, texture and precipitates of grain-oriented silicon steel produced by thin slab casting and rolling process[J]. Chinese Journal of Iron and Steel, 2017, 24(1): 91-96. |
| [4] |
Bing FU,,Hai-jun WANG,Jian-xin YAN,,Li XIANG,Sheng-tao QIU,Guo-guang CHENG. Effects of Temperature and Alloying Elements on �� Phase Fraction of Grain-oriented Silicon Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 573-579. |
| [5] |
Gong-tao LIU,Zhi-qiao LIU,Ping YANG,Wei-min MAO. Correlation between Primary and Secondary Recrystallization Texture Components in Low-temperature Reheated Grain-oriented Silicon Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(11): 1234-1242. |
| [6] |
Zhen LI, , Cheng-jun LIU , Qun SUN , Mao-fa JIANG. Effect of Deoxidation Process on Distribution Characteristics of Inclusions in Silicon Steel Slabs[J]. Chinese Journal of Iron and Steel, 2015, 22(Supplement 1): 104-110. |
|
|
|
|
2008, Vol. 15 
