|
|
Calculation of AlN and MnS Precipitation in Non��Oriented Electrical Steel Produced by CSP Process |
XIANG Li,YUE Er��bin,FAN Ding��dong,QIU Sheng��tao,ZHAO Pei |
State Key Laboratory of Advanced Steel Processing and Products, National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract Combining with the study of analogue experiments and test analysis, the kinetics of precipitation and growth of AlN and MnS in non��oriented electrical steel produced by the CSP process is calculated. The results show that the precipitate phase particles of AlN and MnS in typical non��oriented electrical steel grades produced by the CSP process have grown to some extent in the soaking stage, but the precipitation contents are less than 20% of the total contents of nitride and sulfide. The precipitate phase particles of AlN and MnS have precipitated almost after the hot rolling process. The precipitation contents are more than 80% of the total contents of nitride and sulfide, but it is very late for the precipitate phase particles to grow at the end of the hot rolling process.
|
Received: 01 January 1900
|
|
|
|
[1] |
Jia-long Tian,,Wei Wang,,Wei Yan,,Zhou-hua Jiang,Yi-yin Shan,,Ke Yang. Microstructure characteristics of segregation zone in 17-4PH stainless steel piston rod[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 718-723. |
[2] |
DA Chuan-li,YANG Geng-wei,MAO Xing-ping,,YU Chi-bin,HE Xian-ling,CAI Zheng,. Effect of austenite deformation on phase transformation behavior of 50CrV4 steel[J]. Chinese Journal of Iron and Steel, 2017, 29(5): 411-419. |
[3] |
GUO Jing,CHENG Shu��sen,LI Ji��peng,,YAN Kun ,MEI Ya��guang. Precipitation behavior of carbon bearing inclusion in a slab for low carbon Al��killed steel[J]. Chinese Journal of Iron and Steel, 2016, 28(4): 21-27. |
[4] |
Di WU,,Wan-tang FU,Yong LI,Chun-xu WANG,Jing-lin TANG. Phase Stability, Elastic, Thermo-physical and Electronic Properties of Hexa-(Mo,Cr,W)2C from First-principles Calculations[J]. Chinese Journal of Iron and Steel, 2016, 23(10): 1096-1103. |
[5] |
Hui-xiang YU,,Xin-hua WANG,Jing ZHANG,Wan-jun WANG. Characteristics and Metallurgical Effects of Medium Basicity Refining Slag on Low Melting Temperature Inclusions[J]. Chinese Journal of Iron and Steel, 2015, 22(7): 573-581. |
[6] |
YE Ben����LI Li-xin��HU Sheng-de . Rolling load model of CSP finishing mill group based on statistics method[J]. Chinese Journal of Iron and Steel, 2015, 50(10): 54-58. |
|
|
|
|