|
|
|
| Analysis of Roll Gap Pressure in Sendzimir Mill by FEM |
| YU Hai��liang1,LIU Xiang��hua1,WANG Chao1,Park Hae��doo2 |
| 1. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China; 2. Technical Research Laboratories, POSCO, Pohang 545��090, Korea |
|
|
|
|
Abstract The acting force on the roll system of Sendzimir mill was analyzed using 3D FEM. The roll gap pressure distribution and the acting force between rolls S and O, rolls O and I, rolls O and J, rolls I and A, rolls I and B, as well as rolls J and B were analyzed. The results showed that the roll gap pressure mainly affected the roll surface layer, 50 mm for backup roll; the roll gap pressure distribution is of double peaks among the work roll, the 1st intermediate roll (IMR), and the 2nd IMR; the maximum value of the roll gap pressure between the backup roll and the second IMR appears on the edge of the barrel of rolls; the component force presents the in��para��curve distribution. These are important for reducing the wear of rolls and the break of the backup roll and guiding for production.
|
|
Received: 01 January 1900
|
|
|
|
| [1] |
SUN Jian-liang�� QIU Chou-wu�� PENG Yan�� DONG Zhi-kui�� CHANG Rong-wei. Combined electromagnetic and thermal FEM modeling of heavy cylinder during induction heating process[J]. Chinese Journal of Iron and Steel, 2016, 51(11): 93-96. |
| [2] |
Yong-jiang ZHENG,Guang-xian SHEN,Yi-geng LI,Ming LI,Hong-min LIU. Spatial Vibration and Its Numerical Analytical Method of Four-high Rolling Mills[J]. Chinese Journal of Iron and Steel, 2014, 21(9): 837-843. |
| [3] |
Jung-hyun PARK,Seong-ik HAN,Jong-shik KIM. Improvement of Shape Recognition Performance of Sendzimir Mill Control Systems Using Echo State Neural Networks[J]. Chinese Journal of Iron and Steel, 2014, 21(3): 321-327. |
| [4] |
Hua-gui HUANG,Yong LIU,Feng-shan DU,Lei CHEN. Void Closure Behavior in Large Diameter Steel Rod during H-V Rolling Process[J]. Chinese Journal of Iron and Steel, 2014, 21(3): 287-294. |
| [5] |
G Banaszek,S Berski,H Dyja,A Kawa�bek. Theoretical Modelling of Metallurgical Defect Closing-Up Processes During Forming a Forging[J]. Chinese Journal of Iron and Steel, 2013, 20(9): 111-116. |
| [6] |
WANG Zhao-hui,GAO Quan-jie,YAN Chao,XIA Zhi-yong,ZHANG Yao-bing. Calculation and Analysis of Force in Roll System of 20-High Sendzimir Mill[J]. Chinese Journal of Iron and Steel, 2013, 20(9): 33-39. |
|
|
|
|
2008, Vol. 15 
