|
|
Investigation on Head and Tail Shape Control in the Vertical-Horizontal Rolling Process by FEM |
Zang Xin-Liang LI Xue-Tong |
|
|
Abstract Using 3D rigid-plastic finite element method (FEM), a numerical simulation model for the non-steady state vertical- horizontal rolling process in roughing trains has been built, and is validated by comparison between simulated and experimental values of width and shape of the stock ends. Aiming to certain 2050 roughing process technologies, short shape control (SSC) of the stock ends was investigated using the model. Based on the simulated results, a new SSC model was developed. Moreover, it can be seen that it is effective for the new SSC model to improve shape of the stock ends from the analyzed results.
|
Received: 25 February 2008
|
Corresponding Authors:
Zang Xin-Liang
|
|
|
|
[1] |
Da-shan Sui,*,Hai-ming Zhang,Hong-yang Zhu,Zhe Zhu,Zhen-shan Cui. Effects of process parameters on fragment and refinement of millimeter-grade coarse grains for 316LN steel during hot cogging[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 529-535. |
[2] |
Nan-nan Zhang,*,Dan-yang Lin,Ya-li Li,Yue Zhang,Marie-pierre Planche,Han-lin Liao, Christian Coddet,Fu-yu Dong. In-flight particle characterization and coating formation under low pressure plasma spray condition[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 306-312. |
[3] |
Zheng CHEN,,Qi��jie ZHAI,Jie��yu ZHANG,Hong��gang ZHONG. Effects of Thermal Gradients and Rotational Flows on Grain Growth in 22 t Steel Ingots[J]. Chinese Journal of Iron and Steel, 2016, 23(9): 973-980. |
[4] |
Zheng-wei GU,,Meng-meng L��,,Xin LI,,Hong XU,. Stretch Bending of Z-section Stainless Steel Profile[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 525-530. |
[5] |
Hui ZHANG,Peng HU,,Ming-lin WANG. Mechanism and Improvement of Straight Edge Seam Defect on Hot-rolled Plate Surfaces through Use of Chamfered Slabs[J]. Chinese Journal of Iron and Steel, 2016, 23(6): 539-546. |
[6] |
Cun-jiang TANG,Shi-long LIU,Cheng-jia SHANG. Micromechanical Behavior and Failure Mechanism of F/B Multi-phase High Performance Steel[J]. Chinese Journal of Iron and Steel, 2016, 23(5): 489-494. |
|
|
|
|