|
|
Analysis of Vanadium��Bearing Titanomagnetite Sintering Process by Dissection of Sintering Bed |
BAI Yong��qiang1,CHENG Shu��sen1,BAI Yan��ming2 |
|
|
Abstract Many problems appear in the sintering process of vanadium��bearing titanomagnetite, such as high energy consumption and low productivity; sinter quality is also very poor for its low tumble strength and high reduction degradation. Sinter productivity and quality are dominated by bed permeability and mineralogy structure, which are highly influenced by the thermal state of sintering bed, so the sintering process of titanomagnetite is researched by bed dissection in this work. Temperature evolution curves of sinter materials were measured, and the results show that melting duration, peak temperature duration and sintering temperature of different layers differ greatly from each other; flame front speed and vertical sintering speed of bed lower region are much smaller than those of bed upper region. Simultaneously, sinter samples were collected from different layers, and their mineralogy characteristics are analyzed; sinters from bed lower region have poor mineralogy structure, and the amounts of perovskite and dicalcium silicate increase intensively, which are bad for sinter strength and reduction degradation property. Measures are proposed to improve the quality and productivity of titanomagnetite sinter.
|
Received: 30 June 2010
Published: 15 June 2011
|
Corresponding Authors:
Shu-sen CHENG
E-mail: chengsusen@metall.ustb.edu.cn
|
|
|
|
[1] |
Yuan-dong Pei,,,Sheng-li Wu,,Shao-guo Chen,Zhi-xing Zhao,Gang An,Zheng-ming Cheng, Yao-sheng Luo. Sintering of solid waste generated in iron and steel manufacturing process in Shougang Jingtang[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 697-704. |
[2] |
Shi-feng Liu,,*,An Li,Yao-jia Ren,Dong-feng Li,Zhao-hui Zhang. Heat transfer performance of porous titanium[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 556-560. |
[3] |
Wen-juan Ge,Xu-ting Li,Peng Li,Peng-chao Qiao,Jian-wei Du,Shuai Xu,Yan Wang*. Microstructures and properties of CuZrAl and CuZrAlTi medium entropy alloys prepared by mechanical alloying and spark plasma sintering[J]. Chinese Journal of Iron and Steel, 2017, 24(4): 448-454. |
[4] |
Shan Ren*,Fu-qiang Guo,Qi Zhao,Jie Yang,Lu Yao,Ming Kong. Sintering flue gas desulfurization with different carbon materials modified by microwave irradiation[J]. Chinese Journal of Iron and Steel, 2017, 24(10): 979-984. |
[5] |
Xin-sheng Wang,Zhen-lin Lu*,Lei Jia,Jiang-xian Chen. Preparation of porous titanium materials by powder sintering process and use of space holder technique[J]. Chinese Journal of Iron and Steel, 2017, 24(1): 97-102. |
[6] |
Bao-chao ZHENG,Zhi-fu HUANG,Jian-dong XING,Yi-yang XIAO,Xiao FAN,Yong WANG. Effects of Chromium Addition on Preparation and Properties of Bulk Cementite[J]. Chinese Journal of Iron and Steel, 2016, 23(8): 842-850. |
|
|
|
|