|
|
Modeling of an Impinging Oxygen Jet on Molten Bath Surface in 150 t EAF |
HE Chun-lai1,ZHU Rong1,DONG Kai1,QIU Yong-quan1,SUN Kai-ming2 |
[1. Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2. Tianjin Pipe Group Corporation, Tianjin 300301, China] |
|
|
Abstract A transient three-dimensional mathematical model has been developed to analyze the three-phase flow in a 150 t EAF (electric arc furnace) using oxygen. VOF (multiphase volume of fluid) method is used to simulate the behaviors of molten steel and slag. Numerical simulation was conducted to clarify the transient phenomena of oxygen impingement on molten bath. When oxygen jet impinges on the surface of molten bath, the slag layer is broken and the penetrated cavity in molten steel is created. Simultaneously, the wave is formed at the surface of uncovered steel on which the slag layer is pushed away by jet. The result of numerical simulations shows that the area and velocity of uncovered steel created by impingement, jet penetration depth change from 0.10 m2, 0.0125 m/s, 3.58 cm to 0.72 m2, 0.1445 m/s, 11.21 cm, when the flow rate of an oxygen lance varies from 500 to 2000 m3/h. The results have been validated against water model experiments. More specially, the relation between the penetration depth and oxygen flow rate predicted by numerical simulation has been found to agree well with that concluded by water model.
|
Received: 27 September 2010
Published: 26 September 2011
|
Corresponding Authors:
Chun-Lai HE
E-mail: whyspringcome@163.com
|
|
|
|
[1] |
ZHANG Shao- jun,YU Hong- yang,ZHU Dong- mei,NI Bin- bin,LIU Guo- yong,JIANG Hong. Influence of phase transition latent heat on controlled cooling technological requirements of �]160mm GCr15 bearing steel bar[J]. Chinese Journal of Iron and Steel, 2017, 29(9): 768-774. |
[2] |
WANG San- zhong ,HUANG Zhao- meng,YU Hui,,DU Feng- shan,. Influence of parameters on molten pool field during twin- roll casting process[J]. Chinese Journal of Iron and Steel, 2017, 29(8): 643-648. |
[3] |
YUAN Hui,JIN Yan,XUE Zheng-liang,WANG Wei,LUO Xiao,CHENG Chang-gui. Effect of unsteady flow of molten iron in blast furnace on hearth bottom erosion[J]. Chinese Journal of Iron and Steel, 2017, 29(7): 544-550. |
[4] |
CHEN Li-feng. Numerical simulation and process analysis of Al2O3 inclusion removal in RH refining process[J]. Chinese Journal of Iron and Steel, 2017, 52(7): 42-46. |
[5] |
MA Fu-tao��ZHANG Jian-liang��LIU Yun-cai. BF burden distribution numerical simulation based on genetic algorithm[J]. Chinese Journal of Iron and Steel, 2017, 52(6): 18-25. |
[6] |
YANG Wen-kai,YIN Yuan-de,LI Sheng-zhi. Analysis of continuous seamless steel tube rolling with two-roll grooves using backing mandrel[J]. Chinese Journal of Iron and Steel, 2017, 29(6): 481-487. |
|
|
|
|