|
|
Influence of Carbon Content on Strain Hardening Behaviour of Sintered Plain Carbon Steel Preforms |
S Narayan,A Rajeshkannan |
Mechanical Engineering, The University of the South Pacific, Laucala Campus, Suva 1168, Fiji |
|
|
Abstract Complete experimental investigation on the instantaneous strain hardening behaviour of powder metallurgy (P/M) preforms of pure iron, Fe-0.35%C, Fe-0.75%C and Fe-1.1%C was carried out. The strain hardening behaviour of the above-mentioned P/M sintered steel preforms with aspect ratio of 0.4 under triaxial stress state condition was determined by cold upsetting under nil/no and graphite lubricant conditions. The instantaneous strain hardening value (ni), strength coefficient (Ki), and the stress as a function of strain and densification were obtained and analyzed. Furthermore, a relation was obtained from a semi-log plot of stress against relative density and analyzed to study the hardening behaviour owing to densification as stress was a function of induced strain as well as densification in the P/M materials.
|
Received: 25 June 2010
Published: 26 September 2011
|
|
|
|
[1] |
Yang Yun,Qing-wu Cai,,Bao-sheng Xie,*,Shuang Li. Effect of tempering temperature on strain hardening exponent and flow stress curve of 1000 MPa grade steel for construction machinery[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 950-956. |
[2] |
Bao- sheng XIE,Qing- wu CAI,Wei YU,Shi- xin XU,Ban WANG. A Flow Stress Model for High Strength Steels with Low Carbon Bainite Structure[J]. Chinese Journal of Iron and Steel, 2016, 23(4): 372-379. |
[3] |
Ying KAN,,Shi-hong ZHANG,Li-wen ZHANG,Ming CHENG,Hong-wu SONG,Hong-wei LU. Healing Behavior of Micropores in Powder Metallurgy 316L Stainless Steel during Hot Forging and Heat Treatment[J]. Chinese Journal of Iron and Steel, 2014, 21(9): 862-868. |
[4] |
Dan ZHANG,Ya-zheng LIU,Le-yu ZHOU,Qiang HAN,Bo JIANG,Zhong-zhi LI. Dynamic Recrystallization Behavior of GCr15SiMn Bearing Steel during Hot Deformation[J]. Chinese Journal of Iron and Steel, 2014, 21(11): 1042-1048. |
[5] |
ZHANG Shun-hu,GAO Cai-ru,ZHAO De-wen,WANG Guo-dong. Limit Analysis of Defect-Free Pipe Elbow Under Internal Pressure With Mean Yield Criterion[J]. Chinese Journal of Iron and Steel, 2013, 20(4): 11-15. |
[6] |
A Rajeshkannan;K S Pandey;S Shanmugam;R Narayanasamy. Sintered Fe��0��8%C��1��0%Si��0��4%Cu P/M Steel Preform Behaviour During Cold Upsetting[J]. Chinese Journal of Iron and Steel, 2008, 15(5): 81-0. |
|
|
|
|