|
|
|
| Lateral Growth Rate of Cells in Melt |
| CHANG Guo-wei,CHEN Shu-ying,LI Qing-chun,YUE Xu-dong,JIN Guang-can |
| School of Materials Science and Engineering, Liaoning University of Technology, Jinzhou 121001, Liaoning, China |
|
|
|
|
Abstract Abstract�� Growth process of ��-phase was studied during the solidification of carbon steel. Through analyzing the solute diffusion around cylindrical crystals in the melt, the mathematic representation of lateral growth rate of cylindrical crystals was confirmed; the calculation and analysis of lateral growth rate were carried out. In order to validate the theoretical calculation and analysis, the growth process of ��-phase during the solidification was in-situ observed using a confocal scaning laser microscope (CSLM) and the growth rates were measured through CSLM images. The results show that lateral growth rates of ��-phase in the carbon steel first rapidly decrease with the increase of the radius of the cylindrical crystal, and then slowly fall down or maintain invariable. The radius of ��-phase is the primary factor to affect the growth rate. The higher the temperature gradient is, the bigger the growth rate is. However, the effect of the temperature gradient is feeble. Good correlation is obtained between theoretical analysis and experiment results in absolute values of lateral growth rate and change rule.
|
|
Received: 23 February 2011
Published: 02 May 2012
|
|
|
|
| [1] |
ZHANG Xue- wei,ZHANG Li- feng,YANG Wen,WANG Yi,DONG Yuan- chi��LI Yang- zhou. Nucleation and growth dynamics analysis of MnS particles during solidification process in heavy rail steels[J]. Chinese Journal of Iron and Steel, 2017, 29(9): 724-731. |
| [2] |
WANG Li,,LI Guang- qiang,,,LIU Yu,,ZHANG Zhao,,LI Ya- wei��XU Xiao- feng. Interaction between ultra- low carbon liquid steel and MgO- C refractories containing different carbon contents[J]. Chinese Journal of Iron and Steel, 2017, 29(8): 616-625. |
| [3] |
WANG Dong-chen,LI Xiao-yuan,WEI Li-jin,SHI Jie,WANG Qi,XU Le. Effect of tempering temperature on fracture toughness of high carbon steel[J]. Chinese Journal of Iron and Steel, 2017, 29(6): 494-499. |
| [4] |
LUO Yan-zhao��JI Chen-xi��DENG Xiao-xuan��PAN Hong-wei��ZENG Zhi��CUI Yang. Optimization of mold flux to improve surface quality of ultra-low carbon IF steel[J]. Chinese Journal of Iron and Steel, 2017, 52(4): 38-43. |
| [5] |
LIU Guo-liang��NI You-jin��MA Wen-jun��PEI Xin-wei��ZHANG Li-li��HAI Zhi-li. Continuous casting production technology of high carbon steel in qian��an steel[J]. Chinese Journal of Iron and Steel, 2017, 42(2): 72-75. |
| [6] |
DU Chen-wei��LAN Peng��LI Yang��LU Jue-yu��ZHANG Jia-quan��JIANG Zhong-kuai��SU Rui-xian��ZHOU Xiu-li��WANG Hong-feng. Thermodynamic analysis on solidification and solid phase transformation control of J55 steel continuous casting slab[J]. Chinese Journal of Iron and Steel, 2017, 42(1): 64-67. |
|
|
|
|
2012, Vol. 19 
