|
|
Modeling of Strip Heating Process in Vertical Continuous Annealing Furnace |
WAN Fei,WANG Yong-qin,QIN Shu-ren |
The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China |
|
|
Abstract The mechanism for heat transfer of radiation is usually adopted to heat strip in vertical continuous annealing furnace. The rate of heat transfer among strip and other objects can be hugely affected by the parameters of strip speed, geometry factors and radiating characteristic of surfaces of strip, radiating tubes and walls of furnace. A model including all parameters is proposed for calculating the heat transfer coefficient, predicting the strip temperature and boundary temperature of strip through analyzing these parameters. The boundary temperature is a important datum and different from average arithmetic value of temperature of strip and temperature in furnace. Also, the model can be used to analyze the relation for temperature of strip and heat transfer coefficient, total heat transfer quantity and heating time. The model is built by using the radiating heat transfer rate, the Newton��s law of cooling, and lumped system analysis. The results of calculation are compared to the data from production line. The comparisons indicate that the model can well predict the heating process. The model is already applied for process control in production line. Also, this research will provide a new method for analyzing the radiation heat transfer.
|
Received: 08 March 2011
Published: 29 May 2012
|
Corresponding Authors:
WAN Fei
E-mail: wanfei01@126.com
|
|
|
|
[1] |
YUAN Jing����WU Zhan-fang��XU Li-jun��ZHAO He-ming. Study on heat transfer coefficient of continuous water spray cooling for high temperature steel plate[J]. Chinese Journal of Iron and Steel, 2016, 41(3): 9-13. |
[2] |
WANG Qian��PAN Hong-bo��YAN Jun��SUN Wei��GUO Zhan. Water cooling process for cryogenic rebars[J]. Chinese Journal of Iron and Steel, 2015, 50(7): 69-76. |
[3] |
LAN Peng,,ZHANG Jia-quan,. Numerical Analysis of Interfacial Heat Transfer Coefficient During Large Steel Ingot Solidification[J]. Chinese Journal of Iron and Steel, 2014, 26(8): 29-36. |
[4] |
HAN Hui-quan,HU Jian-ping,WANG Qiang. Effect of Water Flux on Heat Transfer Coefficient for Steel Pipe Cooling[J]. Chinese Journal of Iron and Steel, 2014, 49(3): 55-58. |
[5] |
TONG Chao-nan,GAO Yu-de. Useful Method of Building the Heat Transfer Coefficient Model in Steel Cooling Process[J]. Chinese Journal of Iron and Steel, 2011, 46(7): 50-55. |
[6] |
WAN Fei1,WANG Yong��qin1,JIN Min2. Analysis and Calculation for Rapid Cooling Temperature of Strip in the Continuous Annealing Furnace[J]. Chinese Journal of Iron and Steel, 2011, 23(04): 14-18. |
|
|
|
|