|
|
Numerical Simulation for Effect of Inlet Cooling Rate on Fluid Flow and Temperature Distribution in Tundish |
QU Tian-peng1,LIU Cheng-jun2,JIANG Mao-fa2 |
1. CISDI Chongqing Iron and Steelmaking Plant Integration Co Ltd, Chongqing 401122, China 2. School of Materials and Metallurgy, Northeastern University, Shenyang 110004, Liaoning, China |
|
|
Abstract The fluid flow in tundish is a non-isothermal process and the temperature variation of stream from teeming ladle dominates the fluid flow and thermal distribution in tundish. A numerical model was established to investigate the effect of inlet cooling rate on fluid flow and temperature distribution in tundish based on a FTSC (Flexible Thin Slab Casting) tundish. The inlet cooling rate varies from 0.5 to 0.25 ��/min. Under the present calculation conditions, the following conclusions were made. When the stream temperature from teeming ladle drops seriously (for inlet cooling rate of 0.5 ��/min), there is a ��backward flow�� at the coming end of casting. The horizontal flow along the free surface turns to flow along the bottom of tundish. The bottom flow shortens the fluid flow route in tundish and deteriorates the removal effect of nonmetallic inclusions from molten steel. Nevertheless, when the inlet cooling rate decreases to 0.25 ��/min, the horizontal flow is sustained during the whole casting period. The present research provides theoretical directions for temperature control in teeming ladle and continuous casting tundish during production of advanced steels.
|
Received: 27 April 2011
Published: 25 July 2012
|
Corresponding Authors:
Tian-Peng QU
E-mail: qutianpeng@gmail.com
|
|
|
|
[1] |
ZHANG Shao- jun,YU Hong- yang,ZHU Dong- mei,NI Bin- bin,LIU Guo- yong,JIANG Hong. Influence of phase transition latent heat on controlled cooling technological requirements of �]160mm GCr15 bearing steel bar[J]. Chinese Journal of Iron and Steel, 2017, 29(9): 768-774. |
[2] |
WANG San- zhong ,HUANG Zhao- meng,YU Hui,,DU Feng- shan,. Influence of parameters on molten pool field during twin- roll casting process[J]. Chinese Journal of Iron and Steel, 2017, 29(8): 643-648. |
[3] |
YANG Guang��XU An-jun��HE Dong-feng��WANG Hong-bing��YUAN Fei. Analysis on heat preservation of multifunctional hot metal ladle[J]. Chinese Journal of Iron and Steel, 2017, 52(7): 96-103. |
[4] |
DONG Ze-shang��XUE Qing-guo��ZUO Hai-bin��SHE Xue-feng��WANG Guang��WANG Jing-song. Mathematical model analysis on coke oven gas injection into oxygen blast furnace[J]. Chinese Journal of Iron and Steel, 2017, 52(4): 18-24. |
[5] |
WANG Xiao-ying��YU Zhan-yang��YAN Hui-cheng��QIU Sheng-tao. Analysis of flow characteristics of eight-strand combined tundish[J]. Chinese Journal of Iron and Steel, 2017, 29(4): 287-293. |
[6] |
HU Chang-qing��YAN Long-ge��ZHAO Kai. Model construction and control method for power generation system of parallel sintering waste heat boiler[J]. Chinese Journal of Iron and Steel, 2017, 52(3): 88-92. |
|
|
|
|