|
|
Model of Forming-Accretion on Blast Furnace Copper Stave and Industrial Application |
WU Tong,CHENG Su-sen |
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract Copper staves have been equipped on nearly all of BF (blast furnaces) with volume over than 1000 m3 in China since their introduction from abroad about more than 10 years ago. Because of short application and lack of experience, phenomena of thickened or naked of copper stave happen occasionally which influence production severely. So it is important to study the model of forming-accretion on BF copper stave and realize real-time monitoring of forming-accretion on different copper staves. Therefore, mathematic model of calculating accretion thickness by heat flow of BF is proposed, and the calculated results indicate that accretion thickness could be kept at a reasonable range of around 50 mm by controlling heat flux around 22.0 kW/m2. The monitoring program based on the model was applied to a certain BF in China successfully, and it is found that slip of BF near the inner wall is one of most important reasons that cause fluctuation of accretion thickness. During the period of scheduled maintenance of the certain BF, the thickness of accretion measured through the static pressure holes is in good accordance with the value calculated by the monitoring program, so the results calculated by the monitoring program can be used to guide industrial production.
|
Received: 29 June 2011
Published: 25 July 2012
|
Fund:;National Natural Science Foundation of China |
Corresponding Authors:
Tong Wu
E-mail: wutongd1984@sina.com
|
|
|
|
[1] |
LI Jun��ZHANG Ling-ling��ZHAO Gui-zhou��CANG Da-qiang. Pilot practice of direct modification of molten blast furnace slag and preparation of mineral wool fiber[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 99-103. |
[2] |
XU Ren-ze��ZHANG Jian-liang��ZHANG He-shun��LIU Chang-jiang�� FAN Xiao-yue��WANG Zhi-yu. Influence of TiO2 on properties of Jingtang blast furnace slag and thermodynamic analysis[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 104-108. |
[3] |
WANG Hai-yang��ZHANG Jian-liang��WANG Guang-wei��LI Tao��JIANG Xi��. Feasibility research of injection of BF dust into melter gasifier of COREX[J]. Chinese Journal of Iron and Steel, 2017, 52(8): 29-34. |
[4] |
LONG Yue,,DU Pei-pei,,ZHANG Liang-jin,,LI Zhi-hui,, ,ZHANG Yu-zhu,. Impact of various factors on property and fiber-forming effect of centrifugal blast furnace slag fibers[J]. Chinese Journal of Iron and Steel, 2017, 29(7): 530-535. |
[5] |
HAN Wei-gang��LI Xiu-ping��LIU Jian-hua��ZHANG Chun-xia��ZHOU Ji-cheng��SHI Xin-yue. Temperature drop of hot metal during BF tapping in Shougang Jingtang[J]. Chinese Journal of Iron and Steel, 2017, 52(6): 13-17. |
[6] |
MA Fu-tao��ZHANG Jian-liang��LIU Yun-cai. BF burden distribution numerical simulation based on genetic algorithm[J]. Chinese Journal of Iron and Steel, 2017, 52(6): 18-25. |
|
|
|
|