|
|
|
| Microstructure and Impact Wear Resistance of TiN Reinforced High Manganese Steel Matrix |
| MA You-ping,LI Xiu-lan,WANG Cheng-hui,LU Lu |
| School of Metallurgical Engineering, Xi��an University of Architecture and Technology, Xi��an 710055, Shaanxi, China |
|
|
|
|
Abstract A high-manganese austenitic steel matrix (Mn13) composite reinforced with TiN ceramic particles was synthesized by means of Vacuum-Evaporation Pattern Casting (V-EPC). The composite microstructure and interface bonding of TiN/matrix were analyzed utilizing optical microscope (OM) and X-ray diffraction (XRD). The effects of different volume fraction of TiN on impact wear resistance were evaluated by MLD-10 impact wear test.The results showed that TiN was evenly distributed in composite layer and had a good interface bonding with matrix when the volume fractions of TiN were 27% and 36%, respectively. However, cast defects and TiN agglomeration occurred when the TiN volume fraction increased to 48%. Compared with high-manganese austenitic steel (Mn13), the impact wear resistance of the TiN-reinforced composite is better. In small impact load conditions, composite layer can effectively resist abrasives wear and TiN particles played an important role in determining impact wear resistance of composite layer. In large impact load, the synergistic roles of spalling of TiN particles and the increase of work hardening of Mn13 based material are responsible for impact wear resistance.
|
|
Received: 11 March 2011
Published: 25 July 2012
|
|
Corresponding Authors:
LI Xiu-lan
E-mail: hhqlxl@163.com
|
|
|
|
| [1] |
Hao Li,Yan-chong Yu,,Xiang Ren,Shao-hua Zhang,She-bin Wang,,*. Evolution of Al2O3 inclusions by cerium treatment in low carbon high manganese steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 925-934. |
| [2] |
Yuan-ji Shi,Lan-ji Liu,Lei Zhang,Li-jun Zhang,Li Zheng,Run-xia Li,Bao-yi Yu*. Effect of squeeze casting process on microstructures and flow stress behavior of Al-17.5Si-4Cu-0.5Mg alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 957-965. |
| [3] |
Qi-hang Liu,Xiao-ming Li,Jun-xue Zhao. Analysis of energy consumption for lump coal degradation in melting gasifier[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 770-777. |
| [4] |
Luis Daniel Aguilera Camacho,Santos Garc��a Miranda,Karla Judith Moreno. Tribological performance of uncoated and TiCN-coated D2, M2 and M4 steels under lubricated condition[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 823-829. |
| [5] |
Yu-bao Liu,,Zhi-hong Zhang,,Er-xiong Zhao,,Xian-heng Zhang,,Xiao-qing Wang,, Guo-hua Chen,. Niobium and phosphorus behavior during melting-separation process of pre-reduced niobium ore concentrate[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 691-696. |
| [6] |
Wan-ming Li,Zhou-hua Jiang,,*,Xi-min Zang,Xin Deng. Modeling of flow and temperature distribution in electroslag remelting withdrawal process for fabricating large-scale slab ingots[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 569-578. |
|
|
|
|
2012, Vol. 19 
