|
|
Numerical Simulation and Experimental Investigation of Springback in U-Channel Forming of Tailor Rolled Blank |
ZHANG Hua-wei1,LIU Li-zhong1,HU Ping1,LIU Xiang-hua2 |
1. Faculty of Vehicle Engineering and Mechanics, State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology, Dalian 116024, Liaoning, China 2. Research Institute of Science and Technology,Northeastern University, Shenyang 110819, Liaoning, China |
|
|
Abstract In order to grasp the springback rule of TRB (tailor rolled blank) parts after forming, the springback behavior of TRB was investigated by integrating such three means as theoretical research, numerical simulation and stamping experiments. Fundamental theories of springback were analyzed. The stamping and springback processes of annealed 1.2/2.0 mm TRB, 1.2 mm and 2.0 mm plates for U-channel were simulated, and the simulation results were compared with the experiments. The results indicate that the springback of TRB falls in between those of the 1.2 mm and 2.0 mm plates. It is desirable for the TRB U-channel to have die clearance of 1.1 times maximum blank thickness and friction coefficient of about 0.12, and longer thickness transition zone is preferable. The simulation data demonstrate reasonably good agreement with the experiments.
|
Received: 23 September 2011
Published: 26 September 2012
|
Fund:;��973�� National Basic Research Project of China;Fundamental Research Funds for the Central Universities |
Corresponding Authors:
Hua-Wei ZHANG
E-mail: zhw59595774@gmail.com
|
|
|
|
[1] |
LI Ju-bao, ,LI Yan,ZHANG You-yu,YANG Guang-yu. Effect of heat treatment in dual-phase region on microstructure and property of 430 ferritic stainless steel hot rolled sheet[J]. Chinese Journal of Iron and Steel, 2017, 29(1): 62-66. |
[2] |
REN Xin-yi��GAO Hui-min��TANG Wei��QI Hai-feng��HU Jian-jun��LINGHU Ke-zhi. Ultra wide strip wandering in continuous annealing furnace and initial shape based on pattern recognition[J]. Chinese Journal of Iron and Steel, 2016, 51(8): 49-54. |
[3] |
WANG Wei-wei��LI Guang-ying��ZHANG Jiang-ling��ZHANG Jian��LIU Yong-gang��ZHAN Hua. Effect of continuous annealing process on microstructure and properties of DP780 containing niobium[J]. Chinese Journal of Iron and Steel, 2016, 51(6): 71-75. |
[4] |
SHEN Jing-shu��ZHENG Xiao-fei��KANG Yong-lin . Effect of annealing temperature on microstructure and properties of very thin tinplate[J]. Chinese Journal of Iron and Steel, 2016, 34(6): 1-4. |
[5] |
SHEN Guo- xiong,XU Jian- ping,WU Han- min,XIA Ya- jin,ZHANG Yun- heng,ZHANG Jian- guo. Processes of hot piercing and cold working for 022Cr25Ni7Mo4N[J]. Chinese Journal of Iron and Steel, 2016, 28(5): 70-74. |
[6] |
WANG Chang��XU Hai��feng��HUANG Chong��xiang��CAO Wen��quan��DONG Han. Evolution of ART��annealed microstructure and partition behavior of manganese in medium manganese steel[J]. Chinese Journal of Iron and Steel, 2016, 28(4): 38-46. |
|
|
|
|