|
|
|
| Effects of Temperature and Atmosphere on Sintering Process of Iron Ores |
| ZHANG Jun,GUO Xing-min,HUANG Xue-jun |
| State Key Laboratory of Advanced Metallurgy and School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing, Beijing 100083, China |
|
|
|
|
Abstract The relationship of time to minerals composition in sinters is investigated by mineragraphy are claritied observation and component analysis, and the effects of temperature and atmosphere on mineralization process. Results are obtained as follows. The initial melt forms below the eutectic temperature of CaO��Fe2O3 and CaO��2Fe2O3, which is complex substance containing Ca, Fe, Si and Al, rather than the binary calcium ferrite melt. Minerals composition of binding phase is related to local content of silica in melt, which is influenced by temperature. Appearance of the melt promotes the transition from hematite to magnetite, which then alters the mechanism of calcium ferrite formation. Before the formation of magnetite, the contents of Fe and Ca within the multiple calcium ferrite decrease with temperature, but in the case of magnetite presence, the content of Fe increases solely with increase of temperature and decrease of oxygen potential. Temperature and atmosphere determine minerals composition together, and bring influence on sintering process in different ways. It can be deduced that temperature affects kinetics of the mineralization process, but atmosphere just plays a role in thermodynamics.
|
|
Received: 01 September 2011
Published: 30 October 2012
|
| Fund:National Natural Science Foundation of China��National High Technology Research and Development Program of China |
|
Corresponding Authors:
�ſ� ZHANG Jun
E-mail: zjxt424@163.com
|
|
|
|
| [1] |
ZHANG Shao- jun,YU Hong- yang,ZHU Dong- mei,NI Bin- bin,LIU Guo- yong,JIANG Hong. Influence of phase transition latent heat on controlled cooling technological requirements of �]160mm GCr15 bearing steel bar[J]. Chinese Journal of Iron and Steel, 2017, 29(9): 768-774. |
| [2] |
XU Ren-ze��ZHANG Jian-liang��ZHANG He-shun��LIU Chang-jiang�� FAN Xiao-yue��WANG Zhi-yu. Influence of TiO2 on properties of Jingtang blast furnace slag and thermodynamic analysis[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 104-108. |
| [3] |
FENG Hao��JIANG Zhou-hua��LI Hua-bing��HAN Yu��LUO Yi��DING Wei. Influence of austenitizing temperature on microstructure and mechanical properties of high nitrogen bearing steel 30Cr15Mo1N[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 92-98. |
| [4] |
HUANG Le-qing����WANG Yan-feng��DI Guo-biao��YANG Yong-da��HAN Cheng-liang. Influence of tempering temperature on microstructure and mechanical properties of F/B structural steel[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 79-83. |
| [5] |
WANG San- zhong ,HUANG Zhao- meng,YU Hui,,DU Feng- shan,. Influence of parameters on molten pool field during twin- roll casting process[J]. Chinese Journal of Iron and Steel, 2017, 29(8): 643-648. |
| [6] |
YANG Guang��XU An-jun��HE Dong-feng��WANG Hong-bing��YUAN Fei. Analysis on heat preservation of multifunctional hot metal ladle[J]. Chinese Journal of Iron and Steel, 2017, 52(7): 96-103. |
|
|
|
|
2012, Vol. 19 
