|
|
Inverse Estimation of Transient Heat Flux to Slab Surface |
CUI Miao,YANG Kai,LIU Yun-fei,GAO Xiao-wei |
State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology,Dalian 116024, Liaoning, China |
|
|
Abstract The transient heat flux was calculated using a model for inverse heat conduction problems based on temperature measurements. The unknown heat flux was taken as an optimization variable and solved by minimizing the differences between the calculated temperatures and the measured ones. Several examples were given to show the effectiveness and the accuracy of the inverse algorithm in estimating the transient heat flux to a slab surface. The results show that the inverse approach can be applied in the steel industry or in other areas where the target of investigation is inaccessible to direct measurements or difficult to be directly modeled.
|
Received: 17 April 2012
Published: 28 November 2012
|
Corresponding Authors:
cui miao
E-mail: dlshw@126.com
|
|
|
|
[1] |
ZHANG Han-dong��YAO Yuan-yuan��LING Xian-yan��HU Zhe, . Construct and analysis of the burden ratio��s model of converter steelmaking[J]. Chinese Journal of Iron and Steel, 2016, 28(7): 32-37. |
[2] |
MIAO Yu-chuan. Controlling method on alleviating influence of skid marks on thickness of plate mill[J]. Chinese Journal of Iron and Steel, 2016, 51(4): 49-52. |
[3] |
SHI Chang-jiang��ZHANG Yu��YANG Sheng-zhi. High temperature corrosion resistance of RA330 alloy[J]. Chinese Journal of Iron and Steel, 2015, 27(5): 65-68. |
[4] |
FENG Jun-xiao����ZHANG Xin. Measurement and Calculation Methods of Energy Savings in Strip Reheating Furnace[J]. Chinese Journal of Iron and Steel, 2014, 49(5): 93-98. |
[5] |
HE Li,,CHEN Kai,,KE Hua-li,,ZHANG Wei,,PENG Yan-hua,. Two Dimension Temperature Model for Billet Reheating Furnace[J]. Chinese Journal of Iron and Steel, 2014, 26(10): 21-25. |
[6] |
JING Lin-lin1,YUAN Shou-qian1,LI Du-hong2. Prediction of Yield Strength of Reinforced Using BP Network Based on Partial Least Squares[J]. Chinese Journal of Iron and Steel, 2012, 30(6): 59-62. |
|
|
|
|