|
|
Smelting Oxidation Desulfurization of Copper Slags |
LI Lei,HU Jian-hang,WANG Hua |
Engineering Research Center of Metallurgical Energy Conservation and Emission Reduction of Ministry of Education, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology,Kunming 650093, Yunnan, China |
|
|
Abstract According to the mechanism of sulfur removal easily through oxidation, the process of smelting oxidation desulfurization of copper slags is studied, which supplies a new thinking for obtaining the molten iron of lower sulfur content by smelting reduction of copper slags. Special attention is given to the effects of the holding temperature, the holding time and CaF2, CaO addition amounts on the desulfurization rate of copper slags. The results indicate that the rate of copper slags smelting oxidation desulfurization depends on the matte mass transfer rate through the slag phase. After the oxidation treatment, sulfur of copper slags can be removed as SO2 efficiently. Amount of Ca2+ of copper slags affects the desulfurization rate greatly, and the slag desulfurization rate is reduced by adding a certain amount of CaF2 and CaO. Compared with CaF2, CaO is negative to slags sulfur removal with equal Ca2+ addition. Under the air flow of 0. 3 L/min, the sulfur content of copper slags can be reduced to 0. 00467% in the condition of the holding time of 3 min and the holding temperature of 1500 ��. The sulfur content of molten iron is reduced to 0. 0008% in the smelting reduction of treated slags, and the problem of high sulfur content of molten iron obtained by smelting reduction with copper slag has been successively solved.
|
Received: 01 August 2011
Published: 27 December 2012
|
Fund:;Study on catalltic gasification of municipal solid waste mixing melted copper slag and producting synagas |
|
|
|
[1] |
ZHAO Lei,,GONG Zhi-jun,,WU Wen-fei,. Emission rule of HCN and NOx from semi-coke combustion process in fixed-bed[J]. Chinese Journal of Iron and Steel, 2017, 29(5): 352-356. |
[2] |
GAO Bing�� XIAO Hong�� KONG De-wen�� ZHANG Wen-qiang�� LI Jie. Influence of additives on coke metallurgical properties and microstructures[J]. Chinese Journal of Iron and Steel, 2016, 51(11): 19-25. |
[3] |
WAN Xin-yu,QI Yuan-hong,GAO Jian-jun,QIE Jun-mao,SHANGGUAN Fang-qin. Reduction and melting of copper slag for nuggets and copper recovery[J]. Chinese Journal of Iron and Steel, 2016, 28(10): 22-29. |
[4] |
ZHAO Yu- xiao,XUE Qing- guo,WANG Guang,CHENG Cheng,WANG Jing- song. Dephosphorization in the reduction and melting separation of high phosphorus hematite carbon- containing pellet[J]. Chinese Journal of Iron and Steel, 2015, 27(7): 26-31. |
[5] |
HUANG Hai��ZHOU Xiu-li��MA Bei-yue��LIU Peng-ju��YU Jing-kun. Effects of nickel addition on preparation and properties of low-carbon Al2O3-ZrO2-SiC-C refractories in continuous casting[J]. Chinese Journal of Iron and Steel, 2015, 40(2): 10-14. |
[6] |
YAO Jun-hao����YANG Jun��HAN Dong��GUO Xing-min��. Effect of additives on formation of calcium ferrites in magnesia-riched sinters[J]. Chinese Journal of Iron and Steel, 2015, 50(2): 12-16. |
|
|
|
|