|
|
Influence of FCA Welding Process Parameters on Distortion of 409M Stainless Steel for Rail Coach Building |
M V Venkatesan1,N Murugan1,B M Prasad2,A Manickavasagam2 |
1. Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore 641014, TN, India 2. Integral Coach Factory, Indian Railways, Chennai 600038, TN, India |
|
|
Abstract The influence of flux cored arc welding (FCAW) process parameters such as welding current, travel speed, voltage and CO2 shielding gas flow rate on bowing distortion of 409M ferritic stainless steel sheets of 2 mm in thickness was discussed. The bowing distortions of the welded plates were measured using a simple device called profile tracer. An experimental regression equation was developed to predict the bowing distortion and with this equation, it is easy to select optimized process parameters to achieve minimum bowing distortion. It is revealed that the FCAW process parameters have significant influence on bead profile and the bowing distortion.
|
Received: 07 April 2011
Published: 31 January 2013
|
Corresponding Authors:
VENKATESAN M.V
E-mail: mvvenkatesanicf@gmail.com
|
|
|
|
[1] |
Ying-ying YUE,Cheng-jun LIU,Pei-yang SHI,Mao-fa JIANG,Li-yan QIN,Guang-wei FAN. Descaling Behavior of 430 Hot-rolled Stainless Steel in HCl-based Solution[J]. Chinese Journal of Iron and Steel, 2016, 23(3): 190-196. |
[2] |
M. BALAKRISHNAN,V. BALASUBRAMANIAN,M��A. MUTHU MANICKAM. Evaluation of Zero and Sub-zero Temperature Tensile and Impact Properties of Quenched and Tempered Steel Weldments[J]. Chinese Journal of Iron and Steel, 2016, 23(11): 1177-1187. |
[3] |
Fei GAO,Fu-xiao YU,Hai-tao LIU,Zhen-yu LIU. Hot Deformation Behavior and Flow Stress Prediction of Ultra Purified 17% Cr Ferritic Stainless Steel Stabilized with Nb and Ti[J]. Chinese Journal of Iron and Steel, 2015, 22(9): 827-836. |
[4] |
Xun-zeng HUANG, Dan WANG, Yi-tao YANG. Effect of Precipitation on Intergranular Corrosion Resistance of 430 Ferritic Stainless Steel[J]. Chinese Journal of Iron and Steel, 2015, 22(11): 1062-1068. |
[5] |
Yao-chun ZHANG,Chao CHEN,,Cheng-jia SHANG,Dong-yang LI. Surface Nanocrystallization of Nb-Ti Stabilized 439M Ferritic Stainless Steel[J]. Chinese Journal of Iron and Steel, 2014, 21(9): 891-896. |
[6] |
Ying-tie XU,Zhao-ping CHEN,Mao-tao GONG,,Da SHU,Yue-mei TIAN,,Xiang-qian YUAN. Effects of Mg Addition on Inclusions Formation and Resultant Solidification Structure Changes of Ti-stabilized Ultra-pure Ferritic Stainless Steel[J]. Chinese Journal of Iron and Steel, 2014, 21(6): 583-588. |
|
|
|
|