|
|
Effect of Heat Treatment on Reversed Austenite in Cr15 Super Martensitic Stainless Steel |
JIANG Wen1,ZHAO Kun-yu1,YE Dong1,LI Jun1,LI Zhi-dong1,SU Jie2 |
1. Department of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093,Yunnan, China 2. Institute for Structural Materials, Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract The effect of different heat treatments on the reversed austenite in Cr15 super martensitic stainless steel was investigated. The experimental results indicate that the microstructure of the steel is composed of tempered martensite and diffused reversed austenite after quenching at 1050 �� and tempering from 550 to 750 ��. The volume fraction and size of reversed austenite increase with increasing tempering temperature and both of them reach the maximum value at 700 ��. The volume fraction and size of reversed austenite decrease when the temperature is above 700 ��. The transmission electron microscope (TEM) results indicate that the orientation relationship between tempered martensite and reversed austenite belongs to Kurdjmov-Sach (K-S) relationship.
|
Received: 23 July 2012
Published: 15 May 2013
|
|
|
|
[1] |
Min-qiang Gao,Ying-dong Qu,Guang-long Li,Jun-hua You,Rong-de Li. Cementites decomposition of a pearlitic ductile cast iron during graphitization annealing heat treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 838-843. |
[2] |
Zhu-jun Jiang,Yu-ye Wu,,Jing-min Wang,Cheng-bao Jiang. Influence of cooling rate on magneto-structural transition and magnetocaloric effect of Ni30Cu8Co12Mn37Ga13 alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 711-717. |
[3] |
Cheng-song Liu,Xiao-qin Liu,*,Hong-wei Ni,Shu-feng Yang,Jing-she Li,Fei Ye. Effect of vanadium on modification of inclusions in Mn- and Si-deoxidized steel during heat treatment at 1473 K[J]. Chinese Journal of Iron and Steel, 2017, 24(5): 520-528. |
[4] |
Rui-bin Gou,,,Wen-jiao Dan,,Wei-gang Zhang,,Min Yu,*,Chun-yu Zhang,Yin-hu Qiao, Lu Ma. Microstructure failure in ferrite-martensite dual phase steel under in-situ tensile test[J]. Chinese Journal of Iron and Steel, 2017, 24(3): 350-356. |
[5] |
Yan��jun ZHOU,,Ke��xing SONG,,Jian��dong XING,Zhou LI,Xiu��hua GUO,. Mechanical Properties and Fracture Behavior of Cu��Co��Be Alloy after Plastic Deformation and Heat Treatment[J]. Chinese Journal of Iron and Steel, 2016, 23(9): 933-939. |
[6] |
Wu- hua YUAN,Xue- hui GONG,,Yong- qing SUN,Jian- xiong LIANG. Microstructure Evolution and Precipitation Behavior of 0Cr16Ni5Mo Martensitic Stainless Steel during Tempering Process[J]. Chinese Journal of Iron and Steel, 2016, 23(4): 401-408. |
|
|
|
|