|
|
|
| Microstructural Characterization of Spray Formed FGH4095 Superalloy During Hot Deformation |
| XU Yi,SHU Qin,GUO Biao,SUN Chuan-shui |
| School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, Sichuan, China |
|
|
|
|
Abstract In order to study the hot workability and to optimize the processing parameters for spray formed FGH4095 superalloy, thermal compression tests for spray formed FGH4095 superalloy have been finished by using a Gleeble 1500 thermal simulated test machine at the strain rates of 0. 01-10. 0 s-1 and temperatures of 1050-1140 ��. The effects of strain rate and deformation temperature on the true stress-true strain curves and microstructure evolution were investigated. The results show that the generation of dynamic recrystallization (DRX) depends sensitively on deformation temperature. When the temperature was lower than 1080 ��, long and narrow necklace grains were shown in the microstructure. When the temperature increased to 1140 ��, new recrystallization grains were generated. The size and shape of �á� precipitates in the grains have a very important effect as factors of hindering sufficient migration of dislocations on plastic deformation. The result of thermal processing map is in accord with the microstructure observation, and the best material thermal processing temperature is above 1128 ��.
|
|
Received: 12 October 2012
Published: 16 July 2013
|
| Fund:Projects Sponsored by the National Natural Science Foundation of China |
|
Corresponding Authors:
Yi Xu
E-mail: xybwbj@swjtu.cn
|
|
|
|
| [1] |
Zong-ye Ding,Di Zhang,Qiao-dan Hu,,*,Long Zeng,Jian-guo Li,. Constitutive analysis and optimization on hot working parameters of as-cast high Cr ultra-super-critical rotor steel with columnar grains[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 916-924. |
| [2] |
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 966-973. |
| [3] |
Xiao-li Zhao,,Yong-jian Zhang,Cheng-wei Shao,Wei-jun Hui,Han Dong. Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 830-837. |
| [4] |
Hang-wei Zhou,,Hui-qun Liu,,Dan-qing Yi,,Yu Xiao,,Xiao-long Zhao,Jian Wang,Qi Gao. Effect of �� phase on fatigue crack growth of Ti-6242 alloy[J]. Chinese Journal of Iron and Steel, 2017, 24(8): 811-822. |
| [5] |
Reng-chong Xu,,Yan-lin He,,Hu Jiang,,Hua Wang,,Na-qiong Zhu,,Xiao-gang Lu,, Lin Li,. Microstructures and mechanical properties of ferrite-based lightweight steel with different compositions[J]. Chinese Journal of Iron and Steel, 2017, 24(7): 737-742. |
| [6] |
Wei-jun Hui,*,Na Xiao,Xiao-li Zhao,Yong-jian Zhang,Yu-feng Wu. Effect of vanadium on dynamic continuous cooling transformation behavior of medium-carbon forging steels[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 641-648. |
|
|
|
|
2013, Vol. 20 
