|
|
Inclusions for Ultra-pure Ferritic Stainless Steels Containing 21% Chromium |
WANG Hong-po,SUN Li-feng,PENG Bo,JIANG Mao-fa |
College of Materials and Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
Abstract As stabilizing elements added into ultra-pure ferritic stainless steels, niobium and titanium react with carbon and nitrogen to form carbonitrides and have great effects on the ratio of equiaxed zone and the grain size of solidification structure of ingots, which remarkably affect the quality of cold-rolled sheets. Combined with thermodynamic calculation, style and precipitation progress of inclusions in ultra-pure ferritic stainless steels were investigated by optical microscopy, scanning electron microscopy, transmission electron microscopy and energy dispersive spectroscopy. The results indicate that the inclusions are mainly Ti-Al-N-O system inclusions in ultra-pure ferritic stainless steels. Al2O3 starts to precipitate firstly and then TiOx and TiN precipitates sequently. The inclusions are mainly single TiN particles and complex inclusions with Al2O3-Ti2O3 as cores and covered with TiN under the condition of 0��31% titanium addition and mainly Al2O3 under the condition of 0��01% titanium addition. A few (Nb,Ti)N particles precipitate because of no enough titanium to react with nitrogen when titanium addition is 0��01%. In addition, fine Nb(C,N) particles with size of less than 500 nm precipitate at relatively low temperature.
|
Received: 16 April 2012
Published: 14 October 2013
|
Corresponding Authors:
Hong-Po WANG
E-mail: whp_neu@163.com
|
|
|
|
[1] |
LI Jun��ZHANG Ling-ling��ZHAO Gui-zhou��CANG Da-qiang. Pilot practice of direct modification of molten blast furnace slag and preparation of mineral wool fiber[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 99-103. |
[2] |
XU Ren-ze��ZHANG Jian-liang��ZHANG He-shun��LIU Chang-jiang�� FAN Xiao-yue��WANG Zhi-yu. Influence of TiO2 on properties of Jingtang blast furnace slag and thermodynamic analysis[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 104-108. |
[3] |
JIANG Zhou-hua��ZHANG Xin-fa��LIU Fu-bin��GONG Wei. Harmful impurities control of raw material used in Ni-based superalloy production[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 1-10. |
[4] |
SONG Guang-yi��YANG Quan��WANG Xiao-chen��ZHANG Xi-bang�� WANG Feng-mei��WANG Qiu-na. Work roll wear law for hot strip temper mill[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 54-59. |
[5] |
WANG Bing-xing��XIONG Lei��ZHANG Tian��WANG Zhao-dong��WANG Guo-dong. Influence on deformation permeability of plate by controlled rolling process with inter-pass water cooling technology[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 60-65. |
[6] |
YU Hui��ZHAI Jian-wei��ZHANG Chao-fan��LIU Shuai-shuai��LIU Li-gang. Microstructures and properties of nuclear carbon manganese steels P280GH after accelerated aging[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 66-72. |
|
|
|
|