|
|
|
| Deposition Behavior at Different Substrate Temperatures by Using Supersonic Laser Deposition |
| YUAN Lin-jiang1,LUO fang1,2,YAO Jian-hua1 |
1. Key Laboratory of Special Purpose Equipment and Advanced Processing Technology of Ministry of Education,Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China
2. College of Zhijiang, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China |
|
|
|
|
Abstract The supersonic laser deposition (SLD) is a new fabrication process which combines the supersonic powder stream found in cold spray with laser heating of the deposition zone. Because of the instantaneity of particles impact, the deformation behaviors and the adhesion behaviors of particles impacted on the substrate by SLD cannot be well investigated through experiments. Therefore, a finite element model was developed to solve the problems above. Meanwhile, the heat effect of the substrate heated by laser was discussed. The effective plastic strain and the effective stress between the particle and substrate at different laser preheat temperatures were studied. The results show that laser depositing temperatures of 1000 and 1100 �� on substrate would be the optimized for the bonding of particles and substrate. In addition, the simulation results conformed to experimental results.
|
|
Received: 17 May 2012
Published: 14 October 2013
|
| Fund:The ministry of science and technology international cooperation projects; Natural Science Foundation of Zhejiang Province |
|
|
|
| [1] |
ZHANG Shao- jun,YU Hong- yang,ZHU Dong- mei,NI Bin- bin,LIU Guo- yong,JIANG Hong. Influence of phase transition latent heat on controlled cooling technological requirements of �]160mm GCr15 bearing steel bar[J]. Chinese Journal of Iron and Steel, 2017, 29(9): 768-774. |
| [2] |
WANG San- zhong ,HUANG Zhao- meng,YU Hui,,DU Feng- shan,. Influence of parameters on molten pool field during twin- roll casting process[J]. Chinese Journal of Iron and Steel, 2017, 29(8): 643-648. |
| [3] |
CHEN Li-feng. Numerical simulation and process analysis of Al2O3 inclusion removal in RH refining process[J]. Chinese Journal of Iron and Steel, 2017, 52(7): 42-46. |
| [4] |
YUAN Hui,JIN Yan,XUE Zheng-liang,WANG Wei,LUO Xiao,CHENG Chang-gui. Effect of unsteady flow of molten iron in blast furnace on hearth bottom erosion[J]. Chinese Journal of Iron and Steel, 2017, 29(7): 544-550. |
| [5] |
YANG Wen-kai,YIN Yuan-de,LI Sheng-zhi. Analysis of continuous seamless steel tube rolling with two-roll grooves using backing mandrel[J]. Chinese Journal of Iron and Steel, 2017, 29(6): 481-487. |
| [6] |
MA Fu-tao��ZHANG Jian-liang��LIU Yun-cai. BF burden distribution numerical simulation based on genetic algorithm[J]. Chinese Journal of Iron and Steel, 2017, 52(6): 18-25. |
|
|
|
|
2013, Vol. 20 
